FreeCalypso > hg > fc-magnetite
view src/g23m-gprs/gmm/gmm_rdys.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 219afcfc6250 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GPRS (8441) | Modul : gmm_rdys.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity GMM and implements all | functions to handles the incoming process internal signals as | described in the SDL-documentation (RDY-statemachine) +----------------------------------------------------------------------------- */ #ifndef GMM_RDYS_C #define GMM_RDYS_C #endif #define ENTITY_GMM /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" #include "gprs.h" #include "gsm.h" /* to get a lot of macros */ #include "ccdapi.h" /* to get CCD API */ #include "cnf_gmm.h" /* to get cnf-definitions */ #include "mon_gmm.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "gmm.h" /* to get the global entity definitions */ #include "gmm_rdyf.h" #include "gmm_kerns.h" /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_force_ie_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_FORCE_IE_REQ | | Parameters : force_to_standby - parameter from the AIR message | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_force_ie_req ( UBYTE force_to_standby, BOOL attach_complete ) { TRACE_ISIG( "sig_kern_rdy_force_ie_req" ); switch( GET_STATE( RDY ) ) { case RDY_READY: case RDY_STANDBY_TWICE: case RDY_STANDBY: if ( force_to_standby == STANDBY_YES ) /* * force to standby */ { /* * Start RAU STANDBY TIMER T3312 * <R.GMM.RAUTIMER.M.005>, <R.GMM.READYTIM.M.012> */ rdy_start_t3312(); if (attach_complete) { SET_STATE(RDY,RDY_STANDBY_TWICE) } else { SET_STATE ( RDY, RDY_STANDBY ); } { /* Instead of sending GMMRR_STANDBY_REQ primitive send * CGRLC_FORCE_TO_STANDBY_REQ primitive. GRLC will take * care for GRR standby */ PALLOC (cgrlc_force_to_standby_req,CGRLC_FORCE_TO_STANDBY_REQ); PSEND ( hCommGRLC, cgrlc_force_to_standby_req ); } } else /* * not force to standby */ { /* * The state is kept * SET_STATE ( - ) */ } /* force to standby? */ break; case RDY_DEACTIVATED: /* * The state is not changed * SET_STATE ( - ); */ if ( force_to_standby == STANDBY_YES ) /* * force to standby */ { /* * Allocate CGRLC_FORCE_TO_STANDBY_REQ primitive */ PALLOC (cgrlc_force_to_standby_req,CGRLC_FORCE_TO_STANDBY_REQ); PSEND ( hCommGRLC, cgrlc_force_to_standby_req ); } break; default: TRACE_ERROR( "SIG_KERN_RDY_FORCE_IE_REQ unexpected" ); break; } } /* sig_kern_rdy_force_ie_req() */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_start_t3312_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_START_T3312_REQ | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_start_t3312_req ( void ) { TRACE_ISIG( "sig_kern_rdy_start_t3312_req" ); switch( GET_STATE( RDY ) ) { case RDY_DEACTIVATED: /* * <R.GMM.RAUTIMER.M021> */ rdy_start_t3312(); break; default: break; } } /* sig_kern_rdy_start_t3312() */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_cu_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_CU_REQ | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_cu_req ( void ) { TRACE_ISIG( "sig_kern_rdy_cu_req" ); switch( GET_STATE( RDY ) ) { case RDY_READY: case RDY_DEACTIVATED: /* * This message is used to initiated the initial cell update * * <R.GMM.READYTIM.M.002> * <R.GMM.READYTIM.M.003> * <R.GMM.READYTIM.M.025> * <R.GMM.READYTIM.M.026> */ sig_rdy_kern_cu_ind(); TRACE_EVENT("CU"); vsi_o_ttrace(VSI_CALLER TC_USER4, "CELL UPDATE"); break; default: /* * if the READY timer has expired MS shall not perform * the cell updating procedure when a new cell is selected * * <R.GMM.READYTIM.M.005> */ break; } } /* sig_kern_rdy_cu_req() */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_t3314_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_T3314_REQ | This procedure handels the negotiated ready timer comming | from the ATTACH_ACCEPT and RAU_ACCEPT message | | MSC: 3.17 Timer | MSC: 3.17.6 READY timer behaviour | | Parameters : v_ptmsi - flag from AIR message if PTMSI was negotiated | v_ready_timer - flag from AIR message if T3314 was negotiated | ready_timer - ready_timer struct from AIR message with time | unit and value of the negotiated T3314 | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_t3314_req ( BOOL v_ptmsi, BOOL v_ready_timer, T_ready_timer *p_ready_timer, T_rau_timer *rau_timer, BOOL attach_complete ) { TRACE_ISIG( "sig_kern_rdy_t3314_req" ); if (TIMER_DEACT == rau_timer->timer_unit) { gmm_data->rdy.t3312_deactivated = TRUE; } else { gmm_data->rdy.t3312_deactivated = FALSE; gmm_data->rdy.t3312_val = rdy_get_timer ( rau_timer ); } if (!v_ready_timer) { return; } /* * <R.GMM.READYTIM.A.023> */ if ( TIMER_DEACT == p_ready_timer->timer_unit ) { rdy_cgrlc_ready_timer_config_req (CGRLC_DEACTIVATED) ; SET_STATE ( RDY, RDY_DEACTIVATED ); } else /* if ( p_ready_timer->timer_unit != TIMER_DEACT ) */ { /* * The value for READY TIMER T3314 is set with data from AIR */ ULONG ready_timer = rdy_get_timer ( (T_rau_timer *)p_ready_timer ); /* * changed due t ericsson IOT. I hope that ANITE and R&S will accept this * * BOOL read_timer_changed = (ready_timer!=gmm_data->rdy.t3314_val); */ /* BOOL read_timer_negtiated = v_ready_timer; */ gmm_data->rdy.t3314_val = ready_timer; rdy_cgrlc_ready_timer_config_req (gmm_data->rdy.t3314_val) ; switch( GET_STATE( RDY ) ) { /* * LABEL READY_CONTINUE */ case RDY_READY: /* * LABEL STANDBY_CONTINUE */ case RDY_STANDBY_TWICE: case RDY_STANDBY: if ( p_ready_timer->timer_value == 0 ) { /* * <R.GMM.READYTIM.A.024> */ rdy_start_t3312(); if (attach_complete) { SET_STATE(RDY,RDY_STANDBY_TWICE) } else { SET_STATE ( RDY, RDY_STANDBY ); } { PALLOC (cgrlc_force_to_standby_req, CGRLC_FORCE_TO_STANDBY_REQ); PSEND ( hCommGRLC, cgrlc_force_to_standby_req ); } } else /* if ( p_ready_timer->timer_value != 0 ) */ { /* * v_ptmsi is an indicator for ready_timer negotiation * this decision is here, because the cu will be triggered in * service KERNEL by the ACCEPT message */ if ( /*read_timer_negtiated &&*/ (GET_STATE( RDY ) == RDY_READY) && !v_ptmsi ) { /* * This message is used to initiated the initial cell update * * <R.GMM.READYTIM.M.025> * <R.GMM.READYTIM.M.026> */ /* PALLOC (llgmm_trigger_req, LLGMM_TRIGGER_REQ); llgmm_trigger_req->trigger_cause = LLGMM_TRICS_CELL_UPDATE; PSEND ( hCommLLC, llgmm_trigger_req ); */ sig_rdy_kern_cu_ind(); TRACE_EVENT ("TRIGGER_REQ because of ready timer neg"); } } break; case RDY_DEACTIVATED: /* * I think, that the new state should be READY, because there is * no other way to leave the state DEACTIVATED * * <R.GMM.READYTIM.A.025> */ SET_STATE ( RDY, RDY_READY ); break; default: TRACE_ERROR( "SIG_KERN_RDY_T3314_REQ unexpected" ); break; } } } /* sig_kern_rdy_t3314_req() */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_start_t3302_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_START_T3302_REQ | This signal let the timer T3312 not be startet in state | attampting to update | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_start_t3302_req ( void ) { TRACE_ISIG( "sig_kern_rdy_start_t3302_req" ); gmm_data->rdy.attempting_to_update = TRUE; } /* sig_kern_rdy_start_t3302_req() */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_stop_t3302_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_STOP_T3302_REQ | This signal let the timer T3312 not be startet in state | attampting to update | | Parameters : void | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_stop_t3302_req ( void ) { TRACE_ISIG( "sig_kern_rdy_stop_t3302_req" ); gmm_data->rdy.attempting_to_update = FALSE; } /* sig_kern_rdy_start_t3302_req */ /* +------------------------------------------------------------------------------ | Function : sig_kern_rdy_start_timer_req +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_KERN_RDY_START_TIMER_REQ | This signal ask rdy to start the passed timer with given value | on reception of GMMRR_TRIGGER_REQ | | Parameters : UBYTE timer - timer | ULONG value - timeout value | +------------------------------------------------------------------------------ */ GLOBAL void sig_kern_rdy_start_timer_req ( UBYTE timer, ULONG value ) { TRACE_ISIG( "sig_kern_rdy_start_timer_req" ); TRACE_2_INFO ("START TIMER %d: %dsec",timer, (ULONG) (value/1000) ); gmm_data->rdy.timer_value[timer] = value; vsi_t_start ( GMM_handle , timer, value); return; } /* sig_kern_rdy_start_timer_req */