view src/g23m-gsm/alr/alr_csf.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 27a4235405c6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  GSM-PS
|  Modul   :  alr_CSF
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  This Modul defines the customer specific functions.
+-----------------------------------------------------------------------------
*/

#ifndef ALR_CSF_C
#define ALR_CSF_C

#define ENTITY_PL

/*==== INCLUDES ===================================================*/
#include <string.h>
#include <stdlib.h>
#include <ctype.h>
#include "typedefs.h"
#include "pconst.cdg"
#include "mconst.cdg"
#include "message.h"
#include "ccdapi.h"
#include "vsi.h"
#include "custom.h"
#include "gsm.h"
#include "prim.h"
#include "cnf_alr.h"
#include "mon_alr.h"
#include "pei.h"
#include "tok.h"

#include "pcm.h"
#ifdef GPRS
#include "alr_gprs.h"
#endif

#ifdef _TMS470
#include "inth/iq.h"
#include "armio/armio.h"
#endif  /* _TMS470 */

#include "alr.h"


/*==== IMPORT =====================================================*/

/*==== EXPORT =====================================================*/

/*==== PRIVAT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (8403)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : csf_show_version           |
+--------------------------------------------------------------------+

  PURPOSE : Trace Layer 1 DSP version numbers

*/

GLOBAL void csf_show_version (T_TST_TEST_HW_CON  *ver)
{
#if defined (_TMS470)
  USHORT build, hw, jtag, rev;

  /*
   * Retrieve hardware info and build from library
   */
  hw = 0;

  build = IQ_GetBuild();
  jtag  = IQ_GetJtagId();
  rev   = IQ_GetRevision();

  TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev);

  if (ver)
  {
    /*
     * Retrieve Layer 1 info from primitive
     */
    TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X",
                    ver->dsp_code_version,
                    ver->dsp_patch_version,
                    ver->dsp_checksum);
    TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X",
                    ver->mcu_alr_version,
                    ver->mcu_gprs_version,
                    ver->mcu_tm_version);
    PFREE (ver);
  }
#else  /* _TMS470  */
  if (ver)
  {
    PFREE (ver);
  }
#endif  /* _TMS470 */
}

#if !defined NTRACE

/*
 * The following monitor capabilities are used by the Condat RT system.
 * They are only included in the trace version of protocol stack.

+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_idle       |
+--------------------------------------------------------------------+

  PURPOSE : traces the downlink counter values in idle mode if a change
            occur.

*/

UBYTE v_mon_counter_idle = 0;

GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt)
{
  if (v_mon_counter_idle)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND);

    mon_counter_idle->act_dlt = act_dlt;
    mon_counter_idle->max_dlt = max_dlt;

    PSENDX(RR, mon_counter_idle);
  }
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)       MODULE  : alr_CSF                    |
| STATE   : code                ROUTINE : trc_mon_counter_dedi       |
+--------------------------------------------------------------------+

  PURPOSE : traces the radiolink counter values in dedicated mode
            if a change occur.

*/

UBYTE v_mon_counter_dedi = 0;

GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt)
{
  if (v_mon_counter_dedi)
  {
    /*
     * only if monitoring is enabled
     */
    PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND);

    mon_counter_dedi->act_rlt = act_rlt;
    mon_counter_dedi->max_rlt = max_rlt;

    PSENDX(RR, mon_counter_dedi);
  }
}

#endif /* !NTRACE */

#endif