FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/dl/cus_dl.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for DL of the | mobile station | | Use this header for definitions to integrate the | protocol stack entity DL in your target system ! +----------------------------------------------------------------------------- */ #ifndef CUS_DL_H #define CUS_DL_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the DL timer T200 depending on the various * channel types and service access point identifiers. * Value 1 means timeout, Value 0 means timer is stopped */ #define T200_ACTIVE 2 #define T200_EXPIRED 1 #define T200_STOPPED 0 #define T200_SDCCH_SAPI_0_CNT (T200_EXPIRED + 1) #define T200_FACCH_SAPI_0_CNT_FR (T200_EXPIRED + 9) #define T200_FACCH_SAPI_0_CNT_HR (T200_EXPIRED + 5) #define T200_SDCCH_SAPI_3_CNT (T200_EXPIRED + 3) #define T200_SACCH_SAPI_3_CNT (T200_EXPIRED + 4) /* * PRIMITIVE SIZES * * Description : The primitive size of PH_DATA_REQ depends on the * used channel. It is defined separately to achieve * an optimum of transmitted bytes to physical layer. * The default value which is defined here is calculated * without any alignment bits. * E.g. SACCH N201 = 18 * l1 header = 2 * l2 header = 3 * sdu offset = 2 * sdu length = 2 * ch_type = 1 * dummy = 1 * ----------------- * total = 29 * */ #define SACCH_PRIM_SIZE 29 #define SDCCH_PRIM_SIZE 29 #define FACCH_PRIM_SIZE 29 /* * MAX_QUEUED_MESSAGES * * Description : The constant define the maximum number of * stored layer 3 messages in data link layer. */ #define MAX_QUEUED_MESSAGES 10 /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char #define VERSION_DL "DL 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #if defined (NEW_FRAME) #define VSI_CALLER dl_handle, #define VSI_CALLER_SINGLE dl_handle #else #ifdef OPTION_MULTITHREAD #define VSI_CALLER DL_NAME, #define VSI_CALLER_SINGLE DL_NAME #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif #endif