FreeCalypso > hg > fc-magnetite
view src/g23m-gsm/dl/dl_em.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 27a4235405c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Engineering Mode (EM) Declarations + Macros | +----------------------------------------------------------------------------- */ #ifndef DL_EM_H #define DL_EM_H #ifdef FF_EM_MODE /* ------------ data declarations for EM ---------------- */ #ifdef _SIMULATION_ #pragma message("this build includes engineering mode (FF_EM_MODE)") #endif /* * To optimize the buffersize, the data is packed in the buffer as follows: * type, length, value * Value is the combination of the additional parameters as defined in 8443.601, coded as UBYTE. * Buffersize is maximal size of one event */ #define EM_DL_BUFFER_SIZE 7 #define EM_DL_SEM_SIZE 30 /* Max. number off all data fall on to the event tracing */ /* * EM_MAX_DL_EVENTS defines maximum number of event traces for the engineering mode. * The number is increased by one to ensure that the event numbers defined in the * corresponding document are the same as in the sources. */ #define EM_MAX_DL_EVENTS 6 /* * The offset is used to indicate the source entity the event trace is from. * L1/ALR = 0x00, DL = 0x2D, RR = 0x37, MM = 0x5F, CC = 0x78, SS = 0xAF, SMS = 0xBE, SIM = E1 */ #define DL_OFFSET 0x2D /* * Type is combination of entity index(upper nibble) plus event number(lower nibble). * Bit 8 7 6 5 4 3 2 1 * | entity | event number | */ #define DL_V_1 (1 + DL_OFFSET) #define DL_V_2 (2 + DL_OFFSET) #define DL_V_3 (3 + DL_OFFSET) #define DL_V_4 (4 + DL_OFFSET) #define DL_V_5 (5 + DL_OFFSET) /* Event tracing flags for EM */ EXTERN BOOL dl_v[EM_MAX_DL_EVENTS]; /*---------Functions ---------*/ /* * DL primitives Engineering Mode * Bitmask for the event tracing */ EXTERN void dl_em_dl_event_req (T_EM_DL_EVENT_REQ *em_dl_event_req); /* * If all entities are linked into one module this definitions * prefixes all this functions with the enity name */ #ifdef OPTION_MULTITHREAD #define em_write_buffer_4 _ENTITY_PREFIXED(em_write_buffer_4) #define em_write_buffer_5a _ENTITY_PREFIXED(em_write_buffer_5a) #if defined (TI_PS_HCOMM_CHANGE) #else /* for hCommHandles backward compatibility */ #define hCommMMI _ENTITY_PREFIXED(hCommMMI) #endif #endif #if defined (TI_PS_HCOMM_CHANGE) #else /* for hCommHandles backward compatibility */ #if defined (NEW_FRAME) EXTERN T_HANDLE hCommMMI; /* EM Communication */ #else EXTERN T_VSI_CHANDLE hCommMMI; /* EM Communication */ #endif #endif EXTERN UBYTE em_write_buffer_4 (UBYTE event_no, UBYTE value1, UBYTE value2); EXTERN UBYTE em_write_buffer_5a (UBYTE event_no, UBYTE value1, UBYTE value2, USHORT cs); /* * Semaphor handling */ EXTERN void em_init_dl_event_trace (void); EXTERN void em_dl_sem_init (void); EXTERN void em_dl_sem_exit (void); EXTERN void em_dl_sem_read (void); EXTERN void em_dl_sem_reset (void); /*-----*/ /*-----------------------Event Macro Definition -----------*/ #define DL_EM_CHANNEL_ESTABLISHMENT_PASSED\ /* Channel establishment passed */\ if (dl_v[1])\ {\ dl_v[1] = em_write_buffer_4 (DL_V_1, ch_type, sapi);\ } /* dl_v[1] */ #define DL_EM_CHANNEL_ESTABLISHMENT_FAILED\ /* Channel establishment failed */\ if (dl_v[2])\ {\ dl_v[2] = em_write_buffer_5a (DL_V_2, channel, sapi, NOT_PRESENT_16BIT);\ } /* dl_v[2] */ #define DL_EM_LINK_RELEASE\ /* Link release */\ if (dl_v[3])\ {\ dl_v[3] = em_write_buffer_4 (DL_V_3, ch_type, sapi);\ } /* dl_v[3] */ #define DL_EM_LINK_SUSPENDED\ /* Link suspend */\ if (dl_v[4])\ {\ dl_v[4] = em_write_buffer_4 (DL_V_4, suspend_req->ch_type, suspend_req->sapi);\ } /* dl_v[4] */ #define DL_EM_CHANNEL_FAILURE\ /* Channel failure */\ if (dl_v[5])\ {\ dl_v[5] = em_write_buffer_5a (DL_V_5, pcch->ch_type, pcch_i->sapi, CS_NR_SEQ_ERR);\ } /* dl_v[5] */ #else #define DL_EM_CHANNEL_ESTABLISHMENT_PASSED /*Event 1*/ #define DL_EM_CHANNEL_ESTABLISHMENT_FAILED /*Event 2*/ #define DL_EM_LINK_RELEASE /*Event 3*/ #define DL_EM_LINK_SUSPENDED /*Event 4*/ #define DL_EM_CHANNEL_FAILURE /*Event 5*/ #endif /*FF_EM_MODE*/ #endif /* DL_EM_H */