FreeCalypso > hg > fc-magnetite

view src/g23m-gsm/mm/cnf_mm.h @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 27a4235405c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (8410)
|  Modul   :  CNF_MM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Dynamic Configuration for Mobility Management
+----------------------------------------------------------------------------- 
*/ 

#ifndef CNF_MM_H
#define CNF_MM_H

/*==== CONSTANTS ==================================================*/
/*
 * CONFIGURATION PARAMETER
 *
 * Description :  The constants define the commands for dynamic
 *                configuration proposals.
 */

#define  MM_TIMER_SET       "TIMER_SET"
#define  MM_TIMER_RESET     "TIMER_RESET"
#define  MM_TIMER_SPEED_UP  "TIMER_SPEED_UP"
#define  MM_TIMER_SLOW_DOWN "TIMER_SLOW_DOWN"
#define  MM_TIMER_SUPPRESS  "TIMER_SUPPRESS"
#define  MM_T3212_CNT       "T3212_CNT"
#define  MM_USE_STORED_BCCH "USE_STORED_BCCH"

#define  MM_FFS_RESET_EPLMN  "FFS_RESET_EPLMN"
#define  MM_FFS_READ_EPLMN   "FFS_READ_EPLMN"
#define  MM_FFS_READ_EPLMN_INIT "FFS_READ_EPLMN_INIT"
#define  MM_FFS_WRITE_EPLMN  "FFS_WRITE_EPLMN"


/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

#endif