view src/gpf3/ccd/csn1_s0.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project : CCD
|  Modul   : csn1_s0.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for CSN1_S0 elements
+----------------------------------------------------------------------------- 
*/

/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"

extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs);
extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs);

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)               MODULE  : CCD                   |
| STATE   : code                     ROUTINE : cdc_csn1_s0_decode    |
+--------------------------------------------------------------------+

  PURPOSE : Decoding of the non-standard type CSN1 S0 element.
            The encoding rule for this type is very similar to the 
            CSN.1 type. Except for the presence flag which is 0 in 
            this case. 
            The encoded IE consists of one bit for presence flag and 
            a value part. Only if the flag bit is equal 0 the value 
            part will follow it.
*/

SHORT cdc_csn1_s0_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s0_decode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s0_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_decode (0, e_ref, globs);
}
#endif /* !RUN_FLASH */

#ifndef RUN_FLASH
/*
+--------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                |
| STATE   : code                    ROUTINE : cdc_csn1_s0_encode     |
+--------------------------------------------------------------------+

  PURPOSE : Encoding of the non-standard type CSN1 S0 element.
            The encoding rule for this type is very similar to CSN.1
            type. Except for the presence flag which is 0 in this
            case. The encoded bit pattern consists of a 0 bit as 
            valid flag and a value part. If the element is present
            (the v_xxx component is TRUE in the decoded message)
            a 0 bit will be coded followed by the encoded value part.
            Otherwise a 1 bit will be encoded.
            Possible array types are given by melem[e_ref].repType:
            0) ' ' =>  {0| IE}        (no array)
            1) 'i' =>  {0 IE} ** 1    (many repeations up to a 1 bit)
            2) 'v' =>  {0|1 IE}* val  (val is another IE)
            3) 'c' =>  {0|1 IE}* 3    (3 is  an example)
*/

SHORT cdc_csn1_s0_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_s0_encode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_s0_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));
	#endif
#endif

  return cdc_csn1_sx_encode (0, e_ref, globs);
}
#endif /* !RUN_FLASH */