view src/gpf3/ccd/csn1_sh_opt.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c41a534f33c6
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   : csn1_sh_opt.c
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definition of encoding and decoding functions for CSN1_SH_OPT
|             elements 
+----------------------------------------------------------------------------- 
*/ 


/*
 * standard definitions like GLOBAL, UCHAR, ERROR etc.
 */
#include "typedefs.h"
#include "header.h"

/*
 * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only
 * look at ccdapi.h
 */
#undef USE_DRIVER
#include "ccdapi.h"

/*
 * Types and functions for bit access and manipulation
 */
#include "ccd_globs.h"
#include "bitfun.h"

/*
 * Prototypes of ccd internal functions
 */
#include "ccd.h"

/*
 * Declaration of coder/decoder tables
 */
#include "ccdtable.h"
#include "ccddata.h"


extern SHORT cdc_csn1_sx_decode (int flag, const ULONG e_ref, T_CCD_Globs *globs);
extern SHORT cdc_csn1_sx_encode (int flag, const ULONG e_ref, T_CCD_Globs *globs);

#ifndef RUN_FLASH
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)               MODULE  : CDC_GSM                   |
| STATE   : code                     ROUTINE : cdc_csn1_shl_opt_decode   |
+------------------------------------------------------------------------+

  PURPOSE : Decoding of the GSM Type CSN1 SHL OPT element. 
            This coding type enhances the GSM Type CSN1 SHL. It supports 
            previous behaviour of CSN1_SHL and the lack of the whole 
            element.
            The coding type CSN1_SHL_OPT is suitable for elements which 
            structures match to the following common definition:
            { null | L | H { 0 | 1 < value part > }
            
            The element value can be present, then it is preceded by the 
            flag value H. If the element is represented by the flag L only 
            the value is absent! Besides the absence of the whole element 
            is allowed.
*/

SHORT cdc_csn1_shl_opt_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{

#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_shl_opt_decode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_shl_opt_decode() %s", ccddata_get_alias((USHORT) e_ref, 1));  
	#endif
#endif

  return cdc_csn1_sx_decode (0xFF, e_ref, globs);
}
#endif /* !RUN_FLASH */

#ifndef RUN_FLASH
/*
+------------------------------------------------------------------------+
| PROJECT : CCD (6144)              MODULE  : CDC_GSM                    |
| STATE   : code                    ROUTINE : cdc_csn1_shl_opt_encode    |
+------------------------------------------------------------------------+

  PURPOSE : Encoding of the GSM Type CSN1 SHL OPT element doesn't differ
            from encoding of the GSM Type CSN1 SHL. 
            This element consists of a 1 bit valid flag and a value part. 
            If the element is valid (the v_xxx components is TRUE in the
            decoded message) a H bit will be coded followed by the
            coding of the value part. Otherwise a L bit will be
            coded.

*/

SHORT cdc_csn1_shl_opt_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs)
{
#ifdef DEBUG_CCD
  #ifndef CCD_SYMBOLS
  TRACE_CCD (globs, "cdc_csn1_shl_opt_encode()");
	#else
	TRACE_CCD (globs, "cdc_csn1_shl_opt_encode() %s", ccddata_get_alias((USHORT) e_ref, 1));  
	#endif
#endif

  return cdc_csn1_sx_encode (0xFF, e_ref, globs);
}
#endif /* !RUN_FLASH */