FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/hl_flag.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : hl_flag.c +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Inc. | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definition of encoding and decoding functions for HL_FLAG elements +----------------------------------------------------------------------------- */ /* * standard definitions like GLOBAL, UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes of ccd internal functions */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_decode | +--------------------------------------------------------------------+ PURPOSE : Decoding of the GSM Type HL_FLAG element. This element consists of a single bit only. The decoded value will be 0 if the encoded value is L respectively 1 if the encoded value is H. */ SHORT cdc_hl_flag_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat, max_rep; BOOL is_variable = FALSE; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_decode()"); #else TRACE_CCD (globs, "cdc_hl_flag_decode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif globs->SeekTLVExt = FALSE; cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; repeat = 1; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } if (melem[e_ref].repType NEQ ' ') { is_variable = ccd_calculateRep (e_ref, &repeat, &max_rep, globs); } } /* * Element is not a SPARE. Setup the struct pointer */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements we must set the valid-flag * ??. * Therefore we store the address of the valid flag. */ *(globs->pstruct + globs->pstructOffs++) = TRUE; } globs->pstruct[globs->pstructOffs++] = (UBYTE) (bf_readBit(globs) == GET_HL_PREV(1)); #ifdef DEBUG_CCD #ifdef CCD_SYMBOLS TRACE_CCD (globs, "decoding var %s",ccddata_get_alias((USHORT) e_ref, 1)); #else TRACE_CCD (globs, "decoding var %d", melem[e_ref].elemRef); #endif #endif return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +--------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : CDC_GSM | | STATE : code ROUTINE : cdc_hl_flag_encode | +--------------------------------------------------------------------+ PURPOSE : Encoding of the GSM Type HL_FLAG element. This element consists of a single bit only. If the element is set to 1 a H bit will be coded. Otherwise a L bit will be coded if the element value to encode is set to 0. */ SHORT cdc_hl_flag_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { ULONG repeat=1, amount=1; USHORT cSize = 0, startOffset; ULONG i; ULONG cix_ref, num_prolog_steps, prolog_step_ref; #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_hl_flag_encode()"); #else TRACE_CCD (globs, "cdc_hl_flag_encode() %s", ccddata_get_alias((USHORT) e_ref, 1)); #endif #endif cix_ref = melem[e_ref].calcIdxRef; num_prolog_steps = calcidx[cix_ref].numPrologSteps; prolog_step_ref = calcidx[cix_ref].prologStepRef; if (cix_ref != 0) { /* * if this element is conditional, check the condition */ if (calcidx[cix_ref].numCondCalcs NEQ 0 AND ! ccd_conditionOK (e_ref, globs)) return 1; /* * if this element have a defined Prolog * we have to process it before decoding the bitstream */ if (num_prolog_steps) { ccd_performOperations (num_prolog_steps, prolog_step_ref, globs); } } if (melem[e_ref].elemType NEQ 'S') { /* * Element is not a SPARE. * Setup the offset into the C-structure for this element */ globs->pstructOffs = melem[e_ref].structOffs; if (melem[e_ref].optional) { /* * for optional elements check the valid-flag in the C-struct. * Spare elements does not have a corresponding valid flag. */ if (globs->pstruct[globs->pstructOffs++] == FALSE) { /* * element is invalid so we must code a 0 bit */ bf_writeBit (GET_HL(0), globs); return 1; } else { #ifdef DEBUG_CCD if (globs->pstruct [melem[e_ref].structOffs] != TRUE) { TRACE_CCD (globs, "Ambiguous value for valid flag!\n...assumed 1 for ccdID=%d", e_ref); } #endif /* * element is valid so we must code a 1 bit */ bf_writeBit (GET_HL(1), globs); } } if (melem[e_ref].repType NEQ ' ') { /* As a default amount =1 due to initialization. */ if (melem[e_ref].repType EQ 'i') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repeats given by the C-Structure * exceeds the allowed value CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); repeat = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (repeat < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { repeat = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( repeat < (ULONG)(globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'v') { /* * for variable repeatable elements read the amount * of repeats out of the C-Structure (c_xxx). * If the number of repetitions given by the C-Structure * exceeds the allowed value (maxRepeat) CCD gives a warning! */ if (melem[e_ref].maxRepeat > 255) { ULONG count = (ULONG) (* (USHORT *)(globs->pstruct + globs->pstructOffs++)); amount = MINIMUM (count, (ULONG) melem[e_ref].maxRepeat); if (amount < count) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } else { amount = (ULONG) MINIMUM (globs->pstruct[globs->pstructOffs], melem[e_ref].maxRepeat); if ( amount < (ULONG) (globs->pstruct[globs->pstructOffs]) ) ccd_recordFault (globs, ERR_MAX_REPEAT, CONTINUE, (USHORT) e_ref, globs->pstruct + globs->pstructOffs); } globs->pstructOffs++; } else if (melem[e_ref].repType EQ 'c') { amount = (ULONG) melem[e_ref].maxRepeat; } if (melem[e_ref].repType EQ 'v' OR melem[e_ref].repType EQ 'i') { cSize = (USHORT)(((melem[e_ref].elemType EQ 'V') ? mvar[melem[e_ref].elemRef].cSize : mcomp[melem[e_ref].elemRef].cSize )); startOffset = (USHORT) globs->pstructOffs; } } for (i=0; i < repeat; i++) { if (cSize) { /* * calculate the offset if it is an array */ globs->pstructOffs = (USHORT)(startOffset + (i * cSize)); } /* * encode the value */ if (globs->pstruct[globs->pstructOffs++] EQ FALSE) { /* * element is 0 so we must signalize L */ bf_writeBit (GET_HL(0), globs); } else { /* * element is 1 so we must signalize H */ bf_writeBit (GET_HL(1), globs); } globs->pstructOffs += mvar[melem[e_ref].elemRef].cSize; } if (melem[e_ref].repType EQ 'i') { /* * for variable CNS1 fields we code a 0 flag to mark the end of the * arrays */ bf_writeBit (GET_HL(0), globs); } } return 1; } #endif /* !RUN_INT_RAM */