FreeCalypso > hg > fc-magnetite
view src/gpf3/ccd/noncritical_ext.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | c41a534f33c6 |
children |
line wrap: on
line source
/* +------------------------------------------------------------------------------ | File: noncritical_ext.c +------------------------------------------------------------------------------ | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG. | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +------------------------------------------------------------------------------ | Purpose: Encoding and decoding functions for nonCriticalExtensions elements | | $Identity:$ +------------------------------------------------------------------------------ */ /* * Standard definitions like UCHAR, ERROR etc. */ #include "typedefs.h" #include "header.h" /* * Prototypes of ccd (USE_DRIVER EQ undef) for prototypes only * look at ccdapi.h */ #undef USE_DRIVER #include "ccdapi.h" /* * Types and functions for bit access and manipulation */ #include "ccd_globs.h" #include "bitfun.h" /* * Prototypes and constants in the common part of ccd */ #include "ccd.h" /* * Declaration of coder/decoder tables */ #include "ccdtable.h" #include "ccddata.h" #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : noncritical_ext | | STATE : code ROUTINE : cdc_noncritical_ext_decode | +------------------------------------------------------------------------+ PURPOSE : Decode elements of type nonCriticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report a warning and continue decoding. Whenever a nonCriticalExtensions-IE is extended from NULL or SEQUENCE {} to another type, its CCD coding type will change and the functions in this file will not be called for that IE any more. According to 3GPP TS25.331 V3.6.0, 10.1.1.1: Information elements applicable to choices reserved for future releases of the protocol shall be added to the end of the message. In future releases non critical informaion elements ... shall be appended at the end of the message. See also 3GPP TS25.921 V4.3.0, 10.4. */ SHORT cdc_noncritical_ext_decode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_noncritical_ext_decode()"); #else TRACE_CCD (globs, "cdc_noncritical_ext_decode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][DECODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */ #ifndef RUN_INT_RAM /* +------------------------------------------------------------------------+ | PROJECT : CCD (6144) MODULE : noncritical_ext | | STATE : code ROUTINE : cdc_noncritical_ext_encode | +------------------------------------------------------------------------+ PURPOSE : Encode elements of type nonCriticalExtensions An element of this type should never be encoded or decoded. If the coder faces an IE of this type, it should report an error report and abort. */ SHORT cdc_noncritical_ext_encode (const ULONG c_ref, const ULONG e_ref, T_CCD_Globs *globs) { #ifdef DEBUG_CCD #ifndef CCD_SYMBOLS TRACE_CCD (globs, "cdc_noncritical_ext_encode()"); #else TRACE_CCD (globs, "cdc_noncritical_ext_encode() %s", mcomp[melem[e_ref].elemRef].name); #endif #endif globs->pstructOffs = melem[e_ref].structOffs; /* For optional elements we have already set the valid flag in the * C-structure. We have done it while processing ASN1_SEQ. */ if ( ! cdc_isPresent(e_ref, globs) ) { return 1; } if (melem[e_ref].elemType EQ 'V' AND mvar[melem[e_ref].elemRef].bSize EQ 0) { return 0; } /* * Currently CCD tool chain does not support extensions of this type. * This else-implementation is just an outlook. * else { U16 compRef = melem[e_ref].elemRef; U16 elemRef = mcomp[compRef].componentRef; (void) codec[melem[Elem].codingType][ENCODE_FUN] (compRef, elemRef, globs); }*/ return 1; } #endif /* !RUN_INT_RAM */