view src/gpf3/inc/pcon.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c41a534f33c6
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   : pcon.h
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Condat Coder Decoder For Primitives
|             Global function prototypes
+-----------------------------------------------------------------------------
*/


#ifndef PCON_H
#define PCON_H

#define PCON_LITTLE            1
#define PCON_BIG               2

#define PCON_OK              0
#define PCON_INVALID_OPC     1      /* operation code of primitive not defined */
#define PCON_INVALID_CNT     2      /* wrong number of entries of an variable long array */
#define PCON_INVALID_OFFS    3      /* wrong sum of l_buf and o_buf of an sdu */
#define PCON_INVALID_TYPE    4      /* wrong entry in pvar table */
#define PCON_INVALID_INIT    5      /* wrong initialization */
#define PCON_INVALID_UTAG    6      /* union controller too large */
#define PCON_NO_MEM          7      /* out of memory */
#define PCON_CCDDATA_ERROR   8      /* wrong ccddata format */
#define PCON_INVALID_PTR     9      /* user supplied null pointer for a
                                       mandatory element */
#define PCON_INVALID_VALFLAG 10     /* user supplied valid flag that is neither
                                       1 nor 0 */
#define PCON_INVALID_VALUE   11     /* user supplied value for basetype not
                                       defined in specification */
#define PCON_INVALID_PATH    12     /* component path for prim not found */

#define PCON_CONFIG_PRIM     23     /* primitive was for internal use of PCON,
                                     * not to be relayed to stack
                                     */
#ifdef _TOOLS_
#define PCON_DLLFUNC_ERROR   24      /* could not find a function in pcon.dll */
#define PCON_STRING_END      25      /* command string end reached */
#endif /* _TOOLS_ */

#define PCON_NOT_PRES        0xFFFF
#define PCON_NOT_INCL        0xFFFE

#if !defined (CCDDATA_PREF)
#if defined (_TOOLS_) && defined (CCDDATA_LOAD)
#define CCDDATA_PREF(pcon_fun) cddl_##pcon_fun
#else
#define CCDDATA_PREF(pcon_fun) pcon_fun
#endif /* _TOOLS_ && CCDDATA_LOAD */
#endif /* !CCDDATA_PREF */

typedef struct
{
#ifdef _TOOLS_
  ULONG (*init_prim_coding) (T_HANDLE, UBYTE);
  ULONG (*decode_prim)      (ULONG, void **, void *, ULONG *, ULONG);
  ULONG (*code_prim)        (ULONG, void *, void **, ULONG *, ULONG, char*);
  ULONG (*make_filter)      (char *, void **);
#else
  ULONG (*init_prim_coding) (T_HANDLE, UBYTE);
  ULONG (*decode_prim)      (ULONG, void **, void *, ULONG *, ULONG);
  ULONG (*code_prim)        (ULONG, void *, void **, ULONG *, ULONG, char*);
  ULONG (*pcheck)           (ULONG, void *);
#endif
  int stack_offset;
} T_PCON_PROPERTIES;

typedef struct
{
  USHORT struct_level;  /* the substructure level within the structure, where
                         * the counting started from */
  USHORT cnt_sub_elems; /* the counter of structure subelements */
  BOOL   count_subs ;   /* flag whether sub elements should be counted */
} T_SUB_ELEM_COUNT;

#define PCON_STACK_OFFSET   3072


#ifndef PCON_C
/*
 * function prototypes
 */
extern ULONG CCDDATA_PREF(pcon_init_prim_coding)(T_HANDLE caller, UBYTE format);

extern ULONG CCDDATA_PREF(pcon_decodePrim) (ULONG opc,
                                            void ** decoded_prim,
                                            void * coded_prim,
                                            ULONG * length,
                                            ULONG woff);

extern ULONG CCDDATA_PREF(pcon_codePrim)  (ULONG opc,
                                           void * decoded_prim,
                                           void ** coded_prim,
                                           ULONG * length,
                                           ULONG woff,
                                           char* receiver);

#ifdef _TOOLS_
extern ULONG CCDDATA_PREF(pcon_init_ccddata)(void);
/*
 * The format for the command string in pcon_make_filter is:
 * [<receiver> [<opc>|<primname> [+|-<elem_pathnames>]]]
 * With <elem_pathnames>: <elem_pathname>[,<elem_pathnames]
 * and <elem_pathname> is the unique path of and element in a
 * primitive, with the structure member names separated by '.'.
 * Examples:
 * "TAP ENT_FOO_IND +struct_3.elem_2,struct_1.substruct_0.elem_1" - Set filter
 *   if primitive ENT_FOO_IND if sent to TAP for the two elements elem_2 in
 *   struct_3 and elem_1 in substruct_0 in struct_1.
 * "TAP 800000AF1 +struct_3.elem_2,struct_1.substruct_0.elem_1" - same for given
 *   opc instead of prim name.
 * "TAP ENT_FOO_IND -struct_3.elem_2,struct_1.substruct_0.elem_1" - Set filter
 *   for all other elements than two given here
 * "TAP ENT_FOO_IND" - Delete filter setting for primitive ENT_FOO_IND
 *   sent to TAP
 * "TAP" - Delete all filter settings for any primitive sent to TAP
 * "" - Delete all filter settings
 */
extern ULONG CCDDATA_PREF(pcon_make_filter)(char* string, void** prim);
extern ULONG CCDDATA_PREF(pcon_filter_decode_prim) (ULONG opc,
                                                    void** decoded_prim,
                                                    void* coded_prim,
                                                    ULONG* length,
                                                    ULONG woff,
                                                    void** shadow_prim);
#else
extern ULONG pcon_pcheck  (ULONG opc, void * decoded_prim);
#endif /* _TOOLS_ */

#endif /* !PCON_C */

#endif