FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_pkt.val @ 232:cbee8f31694a
l1_rf12.c: rf_850 Tx calchan bogon fixed
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 12 Mar 2017 20:58:28 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_pkt.val | | SOURCE : "sap\pkt.pdf" | | LastModified : "2002-10-17" | | IdAndVersion : "8443.105.02.106" | | SrcFileTime : "Thu Nov 29 09:50:46 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_PKT_VAL #define P_PKT_VAL #define CDG_ENTER__P_PKT_VAL #define CDG_ENTER__FILENAME _P_PKT_VAL #define CDG_ENTER__P_PKT_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_PKT_VAL__LAST_MODIFIED _2002_10_17 #define CDG_ENTER__P_PKT_VAL__ID_AND_VERSION _8443_105_02_106 #define CDG_ENTER__P_PKT_VAL__SRC_FILE_TIME _Thu_Nov_29_09_50_46_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_PKT_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_sleep_mode */ #define DIO_SLEEP_ENABLE (0x1) /* Enter sleep mode if possible. */ #define DIO_SLEEP_DISABLE (0x2) /* Do not enter sleep mode. */ /* * Value constants for VAL_parity */ #define DIO_PARITY_NO (0x1) /* Don't send a parity bit. */ #define DIO_PARITY_ODD (0x2) /* Send an odd parity bit. */ #define DIO_PARITY_EVEN (0x4) /* Send an even parity bit. */ #define DIO_PARITY_SPACE (0x8) /* Send a space for parity bit. */ /* * Value constants for VAL_flow_control */ #define DIO_FLOW_NO_NO (0x1) /* No flow control for both directions. */ #define DIO_FLOW_SW_NO (0x2) /* Software flow control for receive direction and no flow control for transmit direction. */ #define DIO_FLOW_HW_NO (0x4) /* Hardware flow control for receive direction and no flow control for transmit direction. */ #define DIO_FLOW_NO_SW (0x8) /* No flow control for receive direction and software flow control for transmit direction. */ #define DIO_FLOW_SW_SW (0x10) /* Software flow control for both directions. */ #define DIO_FLOW_HW_SW (0x20) /* Hardware flow control for receive direction and software flow control for transmit direction. */ #define DIO_FLOW_NO_HW (0x40) /* No flow control for receive direction and hardware flow control for transmit direction. */ #define DIO_FLOW_SW_HW (0x80) /* Software flow control for receive direction and hardware flow control for transmit direction. */ #define DIO_FLOW_HW_HW (0x100) /* Hardware flow control for both directions. */ /* * Value constants for VAL_data_mode */ #define DIO_MODE_AT (0x1) /* The TE will transmit AT commands. */ #define DIO_MODE_DATA (0x2) /* The TE will transmit data. */ #define DIO_MODE_TRACE (0x4) /* The TE expects trace information via this device */ #define DIO_MODE_DEFAULT (0x3) /* Default value if the driver can not provide this information */ /* * Value constants for VAL_stop_bits */ #define DIO_STOP_1 (0x1) /* Send 1 stop bit. */ #define DIO_STOP_15 (0x2) /* Send 1.5 stop bits. */ #define DIO_STOP_2 (0x4) /* Send 2 stop bits. */ /* * Value constants for VAL_baud */ #define DIO_BAUD_812500 (0x80000) /* Transmission rate of 812500 bits/sec. */ #define DIO_BAUD_406250 (0x40000) /* Transmission rate of 406250 bits/sec. */ #define DIO_BAUD_203125 (0x20000) /* Transmission rate of 203125 bits/sec. */ #define DIO_BAUD_115200 (0x10000) /* Transmission rate of 115200 bits/sec. */ #define DIO_BAUD_57600 (0x8000) /* Transmission rate of 57600 bits/sec. */ #define DIO_BAUD_38400 (0x4000) /* Transmission rate of 38400 bits/sec. */ #define DIO_BAUD_33900 (0x2000) /* Transmission rate of 33900 bits/sec. */ #define DIO_BAUD_28800 (0x1000) /* Transmission rate of 28800 bits/sec. */ #define DIO_BAUD_19200 (0x800) /* Transmission rate of 19200 bits/sec. */ #define DIO_BAUD_14400 (0x400) /* Transmission rate of 14400 bits/sec. */ #define DIO_BAUD_9600 (0x200) /* Transmission rate of 9600 bits/sec. */ #define DIO_BAUD_7200 (0x100) /* Transmission rate of 7200 bits/sec. */ #define DIO_BAUD_4800 (0x80) /* Transmission rate of 4800 bits/sec. */ #define DIO_BAUD_2400 (0x40) /* Transmission rate of 2400 bits/sec. */ #define DIO_BAUD_1200 (0x20) /* Transmission rate of 1200 bits/sec. */ #define DIO_BAUD_600 (0x10) /* Transmission rate of 600 bits/sec. */ #define DIO_BAUD_300 (0x8) /* Transmission rate of 300 bits/sec. */ #define DIO_BAUD_150 (0x4) /* Transmission rate of 150 bits/sec. */ #define DIO_BAUD_75 (0x2) /* Transmission rate of 75 bits/sec. */ #define DIO_BAUD_AUTO (0x1) /* Automatic detection. */ /* * Value constants for VAL_mux_configuration */ #define DIO_MUX_MODE_BASIC (0x1) /* The multiplexer supports Basic option. */ #define DIO_MUX_MODE_ADVANCED (0x2) /* The multiplexer supports Advanced option. */ #define DIO_MUX_SUBSET_UIH (0x4) /* The multiplexer supports UIH frames. */ #define DIO_MUX_SUBSET_UI (0x8) /* The multiplexer supports UI frames. */ #define DIO_MUX_SUBSET_I (0x10) /* The multiplexer supports I frames. */ /* * Value constants for VAL_guard_period */ #define DIO_ESC_OFF (0x0) /* Turn escape sequence detection off. */ /* * Value constants for VAL_data_bits */ #define DIO_CHAR_5 (0x10) /* Send 5 bits per character. */ #define DIO_CHAR_6 (0x20) /* Send 6 bits per character. */ #define DIO_CHAR_7 (0x40) /* Send 7 bits per character. */ #define DIO_CHAR_8 (0x80) /* Send 8 bits per character. */ /* * Value constants for VAL_convergence */ #define DIO_CONV_SER (0x1) /* The device can contain serial data. */ #define DIO_CONV_PACKET (0x2) /* The device can contain packet data. */ #define DIO_CONV_MUX (0x4) /* The device can start a multiplexer. */ /* * Value constants for VAL_state */ #define DIO_SA (0x80000000)/* read/write, Device ready */ #define DIO_SB (0x40000000)/* read/write, Data valid */ #define DIO_X (0x20000000)/* read/write, Flow control */ #define DIO_RING (0x10000000)/* write, RING indicator */ #define DIO_ESC (0x8000000)/* read, escape sequence detected */ #define DIO_DISC (0x4000000)/* read, link disconnected */ #define DIO_MUX_STOP (0x1000000)/* read/write, stop the multiplexer */ #define DIO_BRK (0x2000000)/* read/write, break received / to be sent */ #define DIO_BRKLEN (0xff) /* read/write, length of the break signal in characters */ #define DIO_PACKET_UNKNOWN (0x0) /* Packet transfer: No packet type available. */ #define DIO_PACKET_IP (0x21) /* Packet transfer: Simple IP packet */ #define DIO_PACKET_CTCP (0x2d) /* Packet transfer: Van Jacobson compressed TCP/IP header */ #define DIO_PACKET_UTCP (0x2f) /* Packet transfer: Van Jacobson uncompressed TCP/IP header */ /* * Value constants for VAL_cause */ #define PKTCS_SUCCESS (0xd200) /* 0b11010010 00000000 No error, success */ #define PKTCS_INVALID_PARAMS (0xd201) /* 0b11010010 00000001 Device number invalid */ #define PKTCS_INVALID_PEER (0xd202) /* 0b11010010 00000010 Peer does not exist */ #define PKTCS_DISCONNECT (0xd203) /* 0b11010010 00000011 The driver signalled a DRV_SIGTYPE_DISCONNECT */ #define PKTCS_INTERNAL_DRV_ERROR (0xd204) /* 0b11010010 00000100 A driver function returned DRV_INTERNAL_ERROR */ /* * user defined constants */ #define DIO_MAX_NAME_LENGTH (0x10) #define DIO_MAX_DATA_LENGTH (0x64) #include "CDG_LEAVE.h" #endif