new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

# This patch applies to the appli_ser_cfg_info initialized data object in the
# init.obj module in main.lib; here we change the default serial configuration
# from RVTMUX on IrDA and F&D on MODEM to RVTMUX on MODEM, nothing on IrDA,
# no F&D available.  This patch will be used as part of the attempt to port
# TCS211 to Mot C139.

[init.obj]

.cinit 8 48
.cinit 9 02