new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

/*
 * This version of fflags.h (ccdgen config file) is a FreeCalypso concoction.
 * Here I set all feature flags to OFF in order to create a configuration
 * that mimics the TCS211 program.
 */

#undef  FF_PS_RSSI
#undef  SIM_PERS
#undef  FF_PHONE_LOCK
#undef  TI_PS_FF_AT_CMD_P_ECC
#undef  TI_PS_FF_REL99_AND_ABOVE
#undef  TI_DUAL_MODE
#undef  REL99
#undef  FF_BHO
#undef  TI_PS_FF_EMR
#undef  TI_PS_FF_RTD
#undef  FF_EGPRS
#undef  REL4
#undef  TI_PS_FF_TBF_EST_PACCH
#undef  TI_PS_FF_QUAD_BAND_SUPPORT