view cdg-hybrid/msg/gmm.mdf @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : gmm.mdf
;*** Creation       : Thu Jun 19 15:32:09 CST 2008
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Air Interface Message Specification
;*** Document Name  : gmm
;*** Document No.   : 8441.603.02.013
;*** Document Date  : 2003-08-18
;*** Document Status: BEING_PROCESSED
;*** Document Author: TLS
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Wed Nov 28 10:18:48 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-18"
PRAGMA 	ID_AND_VERSION 	"8441.603.02.013"



CONST 	L3MAX 	251 	; maximum size of a L3 buffer
CONST 	MAX_N_PDU_NUMBER_LIST 	11 	; maximum size of N-PDU number list



VALTAB 	VAL_tmsi_flag
VAL 	0 	NO 	"not present"
VAL 	1 	YES 	"present"

VALTAB 	VAL_key_sequence
RANGE 	0 .. 6 	"Possible values for the ciphering key sequence number"
VAL 	7 	NO_KEY 	"No key is available (MS to network); Reserved (network to MS)"

VALTAB 	VAL_imeisv_request_value
VAL 	DEF 	 	"IMEISV not requested"
VAL 	0 	IMEISV_NOT_REQUESTED 	"IMEISV not requested"
VAL 	1 	IMEISV_REQUESTED 	"IMEISV requested"

VALTAB 	VAL_type_of_algorithm
VAL 	DEF 	 	"reserved"
VAL 	0 	NO_CIPHERING 	"ciphering not used"
VAL 	1 	GEA_1 	"GPRS Encryption Algorithm GEA/1"
VAL 	2 	GEA_2 	"GPRS Encryption Algorithm GEA/2"
VAL 	3 	GEA_3 	"GPRS Encryption Algorithm GEA/3"
VAL 	4 	GEA_4 	"GPRS Encryption Algorithm GEA/4"
VAL 	5 	GEA_5 	"GPRS Encryption Algorithm GEA/5"
VAL 	6 	GEA_6 	"GPRS Encryption Algorithm GEA/6"
VAL 	7 	GEA_7 	"GPRS Encryption Algorithm GEA/7"

VALTAB 	VAL_update_type_value
VAL 	DEF 	 	"reserved"
VAL 	0 	RAU 	"RA updating"
VAL 	1 	COMBINED_RAU 	"combined RA/LA updating"
VAL 	2 	COMBINED_RAU_IMSI_ATTACH 	"combined RA/LA updating with IMSI attach"
VAL 	3 	PERIODIC_RAU 	"Periodic updating"

VALTAB 	VAL_result_value
VAL 	DEF 	 	"reserved"
VAL 	0 	NORMAL_UPDATED 	"normal RA updated"
VAL 	1 	NORMAL_ATTACHED 	"normal attached or combined RA/LA updated"
VAL 	3 	COMBINED_ATTACHED 	"combined  attached"

VALTAB 	VAL_odd_even
VAL 	0 	EVEN 	"even number of identity digits and also when the TMSI or P-TMSI is used"
VAL 	1 	ODD 	"odd number of identity digits"

VALTAB 	VAL_cause_value
RANGE 	48 .. 63 	"retry upon entry into a new cell"
VAL 	DEF 	 	"Protocol error, unspecified"
VAL 	2 	ERRCS_IMSI_UNKNOWN 	"IMSI unknown in HLR"
VAL 	3 	ERRCS_ILLEGAL_MS 	"Illegal MS"
VAL 	4 	ERRCS_IMEI_NOT_ACCEPTED 	"IMEI not accepted"
VAL 	6 	ERRCS_ILLEGAL_ME 	"Illegal ME"
VAL 	7 	ERRCS_GPRS_NOT_ALLOWED 	"GPRS services not allowed"
VAL 	8 	ERRCS_GSM_GPRS_NOT_ALLOWED 	"GPRS services and non-GPRS services not allowed"
VAL 	9 	ERRCS_NO_MS_ID 	"MS identity cannot be derived by the network"
VAL 	10 	ERRCS_IMPLICIT_DETACHED 	"Implicitly detached"
VAL 	11 	ERRCS_PLMN_NOT_ALLOWED 	"PLMN not allowed"
VAL 	12 	ERRCS_LA_NOT_ALLOWED 	"Location Area not allowed"
VAL 	13 	ERRCS_ROAMING_NOT_ALLOWED 	"Roaming not allowed in this location area"
VAL 	14 	ERRCS_GPRS_NOT_ALLOWED_IN_PLMN 	"GPRS services not allowed in this PLMN"
VAL 	15 	ERRCS_NO_SUITABLE_CELL_IN_LA 	%REL99% 	"Find another allowed location area in the same PLMN"
VAL 	16 	ERRCS_MSC_TEMP_NOT_REACHABLE 	"MSC temporarily not reachable"
VAL 	17 	ERRCS_NET_FAIL 	"Network failure"
VAL 	22 	ERRCS_CONGESTION 	"Congestion"
VAL 	95 	ERRCS_SEMANTIC_INCORRECT 	"Semantically incorrect message"
VAL 	96 	ERRCS_INVALID_M_INFO 	"Invalid mandatory information"
VAL 	97 	ERRCS_TYPE_INVALID 	"Message type non-existent or not implemented"
VAL 	98 	ERRCS_TYPE_INCOMPATIBLE 	"Message type not compatible with the protocol state"
VAL 	99 	ERRCS_IE_INVALID 	"Information element non-existent or not implemented"
VAL 	100 	ERRCS_COND_IE_ERROR 	"Conditional IE error"
VAL 	101 	ERRCS_MESSAGE_INVALID 	"Message not compatible with the protocol state"
VAL 	111 	ERRCS_PROTOCOL_ERROR 	"Protocol error, unspecified"

VALTAB 	VAL_gea_1
VAL 	0 	GEA_1_NO 	"GEA/1 not available"
VAL 	1 	GEA_1_YES 	"GEA/1 available"

VALTAB 	VAL_sm_capabilities_gsm
VAL 	0 	SM_CAP_GSM_NO 	"SM capability not present"
VAL 	1 	SM_CAP_GSM_YES 	"SM capability present"

VALTAB 	VAL_sm_capabilities_gprs
VAL 	0 	SM_CAP_GPRS_NO 	"SM capability not present"
VAL 	1 	SM_CAP_GPRS_YES 	"SM capability present"

VALTAB 	VAL_ucs2_support
VAL 	0 	UCS2_YES 	"preference for the default alphabet over UCS2"
VAL 	1 	UCS2_NO 	"no preference for the default alphabet over UCS2"

VALTAB 	VAL_type_of_identity
VAL 	DEF 	 	"reserved"
VAL 	0 	ID_TYPE_NO_IDENT 	"No Identity"
VAL 	1 	ID_TYPE_IMSI 	"IMSI"
VAL 	2 	ID_TYPE_IMEI 	"IMEI"
VAL 	3 	ID_TYPE_IMEISV 	"IMEISV"
VAL 	4 	ID_TYPE_TMSI 	"TMSI/P-TMSI"

VALTAB 	VAL_type_of_identity_2
VAL 	DEF 	 	"IMSI"
VAL 	1 	ID2_TYPE_IMSI 	"IMSI"
VAL 	2 	ID2_TYPE_IMEI 	"IMEI"
VAL 	3 	ID2_TYPE_IMEISV 	"IMEISV"
VAL 	4 	ID2_TYPE_TMSI 	"TMSI"

VALTAB 	VAL_type_of_attach
VAL 	DEF 	 	"GPRS attach"
VAL 	1 	AT_GPRS 	"GPRS attach"
VAL 	2 	AT_WHILE_IMSI_AT 	"GPRS attach while IMSI attached"
VAL 	3 	AT_COMB 	"Combined GPRS/IMSI attach"

VALTAB 	VAL_u_type_of_detach
VAL 	DEF 	 	"Combined GPRS/IMSI detach"
VAL 	1 	DT_GPRS 	"GPRS detach"
VAL 	2 	DT_IMSI 	"IMSI detach"
VAL 	3 	DT_COMB 	"Combined GPRS/IMSI detach"

VALTAB 	VAL_d_type_of_detach
VAL 	DEF 	 	"re-attach not required"
VAL 	1 	DT_RE_ATTACH 	"re-attch required"
VAL 	2 	DT_NO_RE_ATTACH 	"re-attach not required"
VAL 	3 	DT_IMSI_DETACH 	"IMSI detach (after VLR failure)"

VALTAB 	VAL_split_pg_cycle_code
RANGE 	1 .. 64 	"1-64, respectively"
RANGE 	65 .. 98 	""
VAL 	DEF 	 	"reserved"
VAL 	0 	DRX_NOT_USED 	"no DRX used by MS"

VALTAB 	VAL_split_on_ccch
VAL 	0 	SPLIT_NO 	"Spit on CCCH is not supported by the MS"
VAL 	1 	SPLIT_YES 	"Spit on CCCH is supported by the MS"

VALTAB 	VAL_non_drx_timer
VAL 	0 	DRX_NO 	"no non-DRX mode after transfer state"
VAL 	1 	DRX_1_SEC 	"max. 1 sec non-DRX mode after transfer"
VAL 	2 	DRX_2_SEC 	"max. 2 sec non-DRX mode after transfer"
VAL 	3 	DRX_4_SEC 	"max. 4 sec non-DRX mode after transfer"
VAL 	4 	DRX_8_SEC 	"max. 8 sec non-DRX mode after transfer"
VAL 	5 	DRX_16_SEC 	"max. 16 sec non-DRX mode after transfer"
VAL 	6 	DRX_32_SEC 	"max. 32 sec non-DRX mode after transfer"
VAL 	7 	DRX_64_SEC 	"max. 64 sec non-DRX mode after transfer"

VALTAB 	VAL_timer_unit
VAL 	DEF 	 	"value is incremented in multiples of 1 min"
VAL 	0 	TIMER_2_SEC 	"value is incremented in multiples of 2 sec"
VAL 	1 	TIMER_1_MIN 	"value is incremented in multiples of 1 min"
VAL 	2 	TIMER_1_DH 	"value is incremented in multiples of 1 dh"
VAL 	7 	TIMER_DEACT 	"timer is deactivated"

VALTAB 	VAL_force_to_standby_value
VAL 	DEF 	 	"reserved"
VAL 	0 	STANDBY_NO 	"Force to standby not indicated"
VAL 	1 	STANDBY_YES 	"Force to standby indicated"

VALTAB 	VAL_radio_priority_level_value
VAL 	DEF 	 	"priority level 4"
VAL 	1 	RP_LEVEL_1 	"priority level 1"
VAL 	2 	RP_LEVEL_2 	"priority level 2??????????"
VAL 	3 	RP_LEVEL_3 	"priority level 3"
VAL 	4 	RP_LEVEL_4 	"priority level 4"

VALTAB 	VAL_power_off
VAL 	0 	PO_NORMAL_DETACH 	"normal detach"
VAL 	1 	PO_POWER_OFF 	"power switched off"

VALTAB 	VAL_code
VAL 	DEF 	 	"reserved"
VAL 	0 	SMS 	"SMS Cell Broadcst coding scheme defined in GSM 03.38"
VAL 	1 	USC2 	"UCS2 (16 bit)"

VALTAB 	VAL_add_ci
VAL 	0 	CI_NO 	"The MS shoule not add the letters for the Country's Initials to the text string"
VAL 	1 	CI_ADD 	"The MS should add the letters for the Country's Initials and a separator"

VALTAB 	VAL_nr_sparebits
VAL 	DEF 	 	"bit 'value' to 8 (inclusive) are spare and set to '0' in octet n"
VAL 	0 	SP_NULL 	"this field carries no information about the number of spare bits in octet n"

VALTAB 	VAL_nsapi
VAL 	DEF 	 	"reserved"
VAL 	5 	NSAPI_5 	"NSAPI 5"
VAL 	6 	NSAPI_6 	"NSAPI 6"
VAL 	7 	NSAPI_7 	"NSAPI 7"
VAL 	8 	NSAPI_8 	"NSAPI 8"
VAL 	9 	NSAPI_9 	"NSAPI 9"
VAL 	10 	NSAPI_10 	"NSAPI 10"
VAL 	11 	NSAPI_11 	"NSAPI 11"
VAL 	12 	NSAPI_12 	"NSAPI 12"
VAL 	13 	NSAPI_13 	"NSAPI 13"
VAL 	14 	NSAPI_14 	"NSAPI 14"
VAL 	15 	NSAPI_15 	"NSAPI 15"

VALTAB 	VAL_rev_level_ind
VAL 	0 	REV_LEVEL_IND_99_NO 	"MS supports version(s) older than Release 1999"
VAL 	1 	REV_LEVEL_IND_99_YES 	"MS supports Release 1999"

VALTAB 	VAL_save_time_value 	%REL99%
VAL 	0 	TIME_ADJ_NO 	%REL99% 	"No adjustment for Daylight Saving Time"
VAL 	1 	TIME_ADJ_1 	%REL99% 	"+1 hour adjustment for Daylight Saving Time"
VAL 	2 	TIME_ADJ_2 	%REL99% 	"+2 hours adjustment for Daylight Saving Time"




VAR 	tmsi_flag 	"TMSI flag" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	solsa_capability 	"SoLSA Capability" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	pfc_feature_mode 	"PFC feature mode" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_2 	"GEA/2" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_3 	"GEA/3" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_4 	"GEA/4" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_5 	"GEA/5" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_6 	"GEA/6" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	gea_7 	"GEA/7" 	
 	1

VAL 	@m_gmm - VAL_tmsi_flag@ 	

VAR 	sres_value 	"SRES value" 	
 	32


VAR 	identity_digit 	"Identity digit" 	
 	4


VAR 	key_sequence 	"key sequence" 	
 	3

VAL 	@m_gmm - VAL_key_sequence@ 	

VAR 	a_c_reference_number_value 	"A&C reference number value" 	
 	4


VAR 	imeisv_request_value 	"IMEISV request value" 	
 	3

VAL 	@m_gmm - VAL_imeisv_request_value@ 	

VAR 	type_of_algorithm 	"Type of algorithm" 	
 	3

VAL 	@m_gmm - VAL_type_of_algorithm@ 	

VAR 	lac 	"Location Area Code" 	
 	16


VAR 	rac 	"Routing Area Code" 	
 	8


VAR 	update_type_value 	"Update type value" 	
 	3

VAL 	@m_gmm - VAL_update_type_value@ 	

VAR 	result_value 	"result value" 	
 	3

VAL 	@m_gmm - VAL_result_value@ 	

VAR 	msg_type 	"Message Type" 	
 	8


VAR 	mcc 	"Mobile Country Code" 	
 	4


VAR 	mnc 	"Mobile Network Code" 	
 	4


VAR 	odd_even 	"Odd Even indication" 	
 	1

VAL 	@m_gmm - VAL_odd_even@ 	

VAR 	rand_value 	"RAND value" 	
 	8


VAR 	cause_value 	"Cause value" 	
 	8

VAL 	@m_gmm - VAL_cause_value@ 	

VAR 	gea_1 	"GEA/1" 	
 	1

VAL 	@m_gmm - VAL_gea_1@ 	

VAR 	ss_screening_indicator 	"SS Screening Indicator" 	
 	2


VAR 	sm_capabilities_gsm 	"Short message cap. via dedicated channels" 	
 	1

VAL 	@m_gmm - VAL_sm_capabilities_gsm@ 	

VAR 	sm_capabilities_gprs 	"Short message capability via GPRS channels" 	
 	1

VAL 	@m_gmm - VAL_sm_capabilities_gprs@ 	

VAR 	ucs2_support 	"UCS2 support" 	
 	1

VAL 	@m_gmm - VAL_ucs2_support@ 	

VAR 	type_of_identity 	"Type of identity" 	
 	3

VAL 	@m_gmm - VAL_type_of_identity@ 	

VAR 	type_of_identity_2 	"Type of identity 2" 	
 	3

VAL 	@m_gmm - VAL_type_of_identity_2@ 	

VAR 	tmsi 	"P-TMSI or TMSI" 	
 	32


VAR 	p_tmsi_signature_value 	"P-TMSI signature value" 	
 	24


VAR 	type_of_attach 	"Type of attach" 	
 	3

VAL 	@m_gmm - VAL_type_of_attach@ 	

VAR 	u_type_of_detach 	"Type of detach (uplink)" 	
 	3

VAL 	@m_gmm - VAL_u_type_of_detach@ 	

VAR 	d_type_of_detach 	"Type of detach (downlink)" 	
 	3

VAL 	@m_gmm - VAL_d_type_of_detach@ 	

VAR 	split_pg_cycle_code 	"SPLIT PG CYCLE CODE" 	
 	8

VAL 	@m_gmm - VAL_split_pg_cycle_code@ 	

VAR 	split_on_ccch 	"SPLIT on CCCH" 	
 	1

VAL 	@m_gmm - VAL_split_on_ccch@ 	

VAR 	non_drx_timer 	"non-DRX timer" 	
 	3

VAL 	@m_gmm - VAL_non_drx_timer@ 	

VAR 	timer_unit 	"timer unit" 	
 	3

VAL 	@m_gmm - VAL_timer_unit@ 	

VAR 	timer_value 	"timer value" 	
 	5


VAR 	force_to_standby_value 	"Force to standby value" 	
 	3

VAL 	@m_gmm - VAL_force_to_standby_value@ 	

VAR 	radio_priority_level_value 	"Radio priority level value" 	
 	3

VAL 	@m_gmm - VAL_radio_priority_level_value@ 	

VAR 	power_off 	"Power off" 	
 	1

VAL 	@m_gmm - VAL_power_off@ 	

VAR 	code 	"Coding scheme" 	
 	3

VAL 	@m_gmm - VAL_code@ 	

VAR 	add_ci 	"Add CI" 	
 	1

VAL 	@m_gmm - VAL_add_ci@ 	

VAR 	nr_sparebits 	"Number of spare bits in last octet" 	
 	3

VAL 	@m_gmm - VAL_nr_sparebits@ 	

VAR 	year 	"Year" 	
 	4


VAR 	month 	"Month" 	
 	4


VAR 	day 	"Day" 	
 	4


VAR 	hour 	"Hour" 	
 	4


VAR 	minute 	"Minute" 	
 	4


VAR 	second 	"Second" 	
 	4


VAR 	time_zone_value 	"Time zone value" 	
 	8


VAR 	nsapi 	"NSAPI" 	
 	4

VAL 	@m_gmm - VAL_nsapi@ 	

VAR 	receive_n_pdu_number_val 	"Receive N-PDU Number value" 	
 	8


VAR 	text_string 	"Text string" 	
 	8


VAR 	dmy 	"Dummy" 	
 	4


VAR 	rev_level_ind 	"Revision level indicator" 	
 	1

VAL 	@m_gmm - VAL_rev_level_ind@ 	

VAR 	nsapi_set 	%REL99% 	"NSAPI set" 	
 	16


VAR 	lsa_id 	%REL99% 	"LSA identifier" 	
 	8


VAR 	save_time_value 	%REL99% 	"Daylight Saving Time" 	
 	2

VAL 	@m_gmm - VAL_save_time_value@ 	




COMP 	authentication_parameter_rand 	"Authentication parameter RAND"
{
 	 	rand_value 	[16] 	 ; RAND value
}



COMP 	ciphering_key_sequence_number 	"Ciphering Key Sequence Number"
{
 	.0  ; spare
 	 	key_sequence 	 ; Key Sequence
}



COMP 	a_c_reference_number 	"A&C reference number"
{
 	 	a_c_reference_number_value 	 ; A&C reference number value
}



COMP 	imeisv_request 	"IMEISV request"
{
 	.0  ; spare
 	 	imeisv_request_value 	 ; IMEISV request
}



COMP 	ciphering_algorithm 	"Ciphering algorithm"
{
 	.0  ; spare
 	 	type_of_algorithm 	 ; Type of  algorithm
}



COMP 	authentication_parameter_sres 	"Authentication parameter SRES"
{
 	 	sres_value 	 ; SRES value
}



COMP 	identity_type_2 	"Identity type 2"
{
 	.0  ; spare
 	 	type_of_identity_2 	 ; Type of identity 2
}



COMP 	routing_area_identification 	"Routing Area Identification"
{
 	BCD_NOFILL  	mcc 	[3] 	 ; Mobile Country Code
 	BCD_MNC  	mnc 	[2..3] 	 ; Mobile Network Code
 	 	lac 	 ; Location Area Code
 	 	rac 	 ; Routing Area Code
}



COMP 	update_type 	"Update type"
{
 	.0  ; spare
 	 	update_type_value 	 ; Update type value
}



COMP 	result_gmm 	"Result"
{
 	.0  ; spare
 	 	result_value 	 ; result value
}



COMP 	mobile_identity 	"Mobile Identity"
{
 	 	type_of_identity 	(GETPOS,:,4,+,:,1,+,SETPOS) ; Type of identity
 	 	odd_even 	(SETPOS) ; Odd/ Even indicaction
 	< (type_of_identity # ID_TYPE_NO_IDENT AND type_of_identity # ID_TYPE_TMSI) 	BCDODD  	identity_digit 	[0..16] 	(SETPOS)> 	 ; Identity digit
 	< (type_of_identity = ID_TYPE_TMSI) 	.1111 (:,SETPOS,8,+)> 	 ; spare
 	< (type_of_identity = ID_TYPE_TMSI) 	 	tmsi 	[.32] 	(SETPOS)> 	 ; TMSI or P-TMSI
 	< (type_of_identity = ID_TYPE_NO_IDENT) 	 	dmy 	[0..16] 	(SETPOS)> 	 ; dummy
}
TYPEDEF COMP mobile_identity 	gmobile_identity 	"PTMSI mobile Identity"



COMP 	attach_type 	"Attach type"
{
 	.0  ; spare
 	 	type_of_attach 	 ; Type of attach
}



COMP 	d_detach_type 	"Detach type (downlink)"
{
 	.0  ; spare
 	 	d_type_of_detach 	 ; Type of detach (downlink)
}



COMP 	u_detach_type 	"Detach type (uplink)"
{
 	 	power_off 	 ; Power off
 	 	u_type_of_detach 	 ; Type of detach (uplink)
}



COMP 	drx_parameter 	"DRX parameter"
{
 	 	split_pg_cycle_code 	 ; SPLIT PG CYCLE CODE
 	.0000  ; spare
 	 	split_on_ccch 	 ; SPLIT on CCCCH
 	 	non_drx_timer 	 ; non_DRX timer
}



COMP 	ready_timer 	"GPRS READY timer value"
{
 	 	timer_unit 	 ; timer unit
 	 	timer_value 	 ; timer value
}
TYPEDEF COMP ready_timer 	rau_timer 	"GPRS RAU timer value"



COMP 	t3302 	"T3302"
{
 	 	timer_unit 	 ; timer unit
 	 	timer_value 	 ; timer value
}



COMP 	p_tmsi_signature 	"P-TMSI signature"
{
 	 	p_tmsi_signature_value 	 ; P-TMSI signature value
}



COMP 	force_to_standby 	"Force to standby"
{
 	.0  ; spare
 	 	force_to_standby_value 	 ; Force to standby value
}



COMP 	radio_priority 	"Radio priority"
{
 	.0  ; spare
 	 	radio_priority_level_value 	 ; Radio priority level value
}



COMP 	gmm_cause 	"GMM cause"
{
 	 	cause_value 	 ; Cause value
}



COMP 	receive_n_pdu_number_list_val 	"Receive N-PDU Number List value"
{
 	 	nsapi 	 ; NSAPI
 	 	receive_n_pdu_number_val 	 ; Receive N-PDU Number value
}



COMP 	receive_n_pdu_number_list 	"Receive N-PDU Number List"
{
 	 	receive_n_pdu_number_list_val 	[(LTAKE/12)..MAX_N_PDU_NUMBER_LIST] 	 ; Receive N-PDU Number List value
 	S_PADDING .00000000  ; Spare Padding
}



COMP 	full_network_name 	"Full network name"
{
 	.1  ; ext 1
 	 	code 	 ; coding scheme
 	 	add_ci 	 ; Add CI
 	 	nr_sparebits 	 ; Number of spare bits in last octet
 	 	text_string 	[1..254] 	 ; Text String
}
TYPEDEF COMP full_network_name 	short_network_name 	"Short network name"



COMP 	time_zone 	"Time Zone"
{
 	 	time_zone_value 	 ; Time zone value
}



COMP 	time_zone_and_time 	"Net time and time zone"
{
 	BCDEVEN  	year 	[2] 	 ; Year
 	BCDEVEN  	month 	[2] 	 ; Month
 	BCDEVEN  	day 	[2] 	 ; Day
 	BCDEVEN  	hour 	[2] 	 ; Hour
 	BCDEVEN  	minute 	[2] 	 ; Minute
 	BCDEVEN  	second 	[2] 	 ; Second
 	 	time_zone_value 	 ; Time zone value
}



COMP 	tmsi_status 	"TMSI status"
{
 	.000  ; spare
 	 	tmsi_flag 	 ; TMSI flag
}



COMP 	ext_gea_bits 	"Extended GEA bits"
{
 	 	gea_2 	 ; GEA/2
 	 	gea_3 	 ; GEA/3
 	 	gea_4 	 ; GEA/4
 	 	gea_5 	 ; GEA/5
 	 	gea_6 	 ; GEA/6
 	 	gea_7 	 ; GEA/7
}



COMP 	ms_network_capability 	"MS Network Capability"
{
 	 	gea_1 	 ; GPRS Encryption Algorithm GEA/1
 	 	sm_capabilities_gsm 	 ; Short message cap. via dedicated channels
 	 	sm_capabilities_gprs 	 ; Short message capability via GPRS channels
 	 	ucs2_support 	 ; UCS2 support
 	 	ss_screening_indicator 	 ; SS Screening Indicator
 	 	solsa_capability 	 ; SoLSA Capability
 	 	rev_level_ind 	 ; Revision level indcator
 	 	pfc_feature_mode 	 ; PFC feature mode
 	 	ext_gea_bits 	 ; Extended GEA bits
 	.0  ; spare
}



COMP 	eqv_plmn 	"PLMN"
{
 	BCD_NOFILL  	mcc 	[3] 	 ; Mobile Country Code
 	BCD_MNC  	mnc 	[2..3] 	 ; Mobile Network Code
}



COMP 	eqv_plmn_list 	"PLMN list"
{
 	 	eqv_plmn 	[1..5] 	 ; PLMN
}



COMP 	cell_notification 	"Cell Notification"
{
}



COMP 	p_tmsi_signature_2 	%REL99% 	"P-TMSI signature 2"
{
 	 	p_tmsi_signature_value 	 ; P-TMSI signature value
}



COMP 	pdp_context_status 	%REL99% 	"PDP context status"
{
 	 	nsapi_set 	 	%REL99% ; NSAPI set
}



COMP 	lsa_identifier 	%REL99% 	"LSA identifier"
{
 	 	lsa_id 	[1..3] 	 	%REL99% ; LSA ID
}



COMP 	daylight_save_time 	%REL99% 	"Daylight Saving Time"
{
 	.000000  	%REL99% ; Spare
 	 	save_time_value 	 	%REL99% ; Daylight Saving Time
}






MSG 	attach_request 	uplink 	1 ; attach request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	ms_network_capability 	 ; MS network capability
 	GSM1_V  	attach_type 	 ; Attach type
 	GSM1_V  	ciphering_key_sequence_number 	 ; Ciphering key sequence number
 	GSM3_V  	drx_parameter 	 ; DRX parameter
 	GSM4_LV  	gmobile_identity 	 ; P-TMSI or IMSI
 	GSM3_V  	routing_area_identification 	 ; Old routing area identification
 	GSM4_LV EXTERN @m_rr_com - ra_cap@ 	 	ra_cap 	 ; MS Radio Access capability
 	GSM3_TV  	p_tmsi_signature 	0x19 	 ; Old P-TMSI signature
 	GSM3_TV  	ready_timer 	0x17 	 ; Requested READY timer value
 	GSM1_TV  	tmsi_status 	0x9 	 ; TMSI status
}



MSG 	attach_accept 	downlink 	2 ; attach accept
{
 	GSM3_V  	msg_type 	 ; Message type
 	GSM1_V  	result_gmm 	 ; result
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	GSM3_V  	rau_timer 	 ; Periodic RA update timer
 	GSM1_V  	radio_priority 	 ; Radio priority for SMS
 	.0000  ; Spare half octet
 	GSM3_V  	routing_area_identification 	 ; Routing area identification
 	GSM3_TV  	p_tmsi_signature 	0x19 	 ; P-TMSI signature
 	GSM3_TV  	ready_timer 	0x17 	 ; Negotiated READY timer value
 	GSM4_TLV  	gmobile_identity 	0x18 	 ; Allocated P-TMSI
 	GSM4_TLV  	mobile_identity 	0x23 	 ; MS identity
 	GSM3_TV  	gmm_cause 	0x25 	 ; GMM  cause
 	GSM4_TLV  	t3302 	0x2A 	 ; T3302 value
 	GSM2_T  	cell_notification 	0x8C 	 ; Cell Notification
 	GSM4_TLV  	eqv_plmn_list 	0x4A 	 ; Equivalent PLMNs
}



MSG 	attach_complete 	uplink 	3 ; Attach complete
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	attach_reject 	downlink 	4 ; Attach reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_V  	gmm_cause 	 ; GMM  cause
 	GSM4_TLV  	t3302 	0x2A 	 	%REL99% ; T3302 value
}



MSG 	d_detach_request 	downlink 	5 ; Detach request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	d_detach_type 	 ; Detach type (downlink)
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	GSM3_TV  	gmm_cause 	0x25 	 ; GMM  cause
}



MSG 	u_detach_request 	uplink 	5 ; Detach request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	u_detach_type 	 ; Detach type (uplink)
 	.0000  ; Spare half octet
 	GSM4_TLV  	gmobile_identity 	0x18 	 	%REL99% ; P TMSI
 	GSM4_TLV  	p_tmsi_signature_2 	0x19 	 	%REL99% ; P-TMSI signature 2
}



MSG 	u_detach_accept 	uplink 	6 ; Detach accept
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	d_detach_accept 	downlink 	6 ; Detach accept
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	.0000  ; Spare half octet
}



MSG 	routing_area_update_request 	uplink 	8 ; Routing area update request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	update_type 	 ; Update type
 	GSM1_V  	ciphering_key_sequence_number 	 ; Ciphering key sequence number
 	GSM3_V  	routing_area_identification 	 ; Old routing area identification
 	GSM4_LV EXTERN @m_rr_com - ra_cap@ 	 	ra_cap 	 ; MS Radio Access capability
 	GSM3_TV  	p_tmsi_signature 	0x19 	 ; Old P-TMSI signature
 	GSM3_TV  	ready_timer 	0x17 	 ; Requested READY timer value
 	GSM3_TV  	drx_parameter 	0x27 	 ; DRX parameter
 	GSM1_TV  	tmsi_status 	0x9 	 ; TMSI status
 	GSM4_TLV  	gmobile_identity 	0x18 	 	%REL99% ; P-TMSI
 	GSM4_TLV  	ms_network_capability 	0x31 	 ; MS network capability
 	GSM4_TLV  	pdp_context_status 	0x32 	 	%REL99% ; PDP context status
}



MSG 	routing_area_update_accept 	downlink 	9 ; Routing area update accept
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	GSM1_V  	result_gmm 	 ; Update result
 	GSM3_V  	rau_timer 	 ; Periodic RA update timer
 	GSM3_V  	routing_area_identification 	 ; Routing area identification
 	GSM3_TV  	p_tmsi_signature 	0x19 	 ; P-TMSI signature
 	GSM4_TLV  	gmobile_identity 	0x18 	 ; Allocated P-TMSI
 	GSM4_TLV  	mobile_identity 	0x23 	 ; MS identity
 	GSM4_TLV  	receive_n_pdu_number_list 	0x26 	 ; Receive N-PDU Number List
 	GSM3_TV  	ready_timer 	0x17 	 ; Negotiated READY timer value
 	GSM3_TV  	gmm_cause 	0x25 	 ; GMM cause
 	GSM4_TLV  	t3302 	0x2A 	 ; T3302 value
 	GSM2_T  	cell_notification 	0x8C 	 ; Cell Notification
 	GSM4_TLV  	eqv_plmn_list 	0x4A 	 ; Equivalent PLMNs
}



MSG 	routing_area_update_complete 	uplink 	10 ; Routing area update complete
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	receive_n_pdu_number_list 	0x26 	 ; Receive N-PDU Number List
}



MSG 	routing_area_update_reject 	downlink 	11 ; Routing area update reject
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_V  	gmm_cause 	 ; GMM  cause
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	.0000  ; Spare half octet
 	GSM4_TLV  	t3302 	0x2A 	 	%REL99% ; T3302 value
}



MSG 	p_tmsi_reallocation_command 	downlink 	16 ; P-TMSI reallocation command
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	gmobile_identity 	 ; Allocated P-TMSI
 	GSM3_V  	routing_area_identification 	 ; Routing area identification
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	.0000  ; Spare half octet
 	GSM3_TV  	p_tmsi_signature 	0x19 	 ; P-TMSI signature
}



MSG 	p_tmsi_reallocation_complete 	uplink 	17 ; P-TMSI reallocation complete
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	authentication_and_ciphering_request 	downlink 	18 ; Authentication and ciphering request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	ciphering_algorithm 	 ; Ciphering algorithm
 	GSM1_V  	imeisv_request 	 ; IMEISV request
 	GSM1_V  	force_to_standby 	 ; Force to standby
 	GSM1_V  	a_c_reference_number 	 ; A&C reference number
 	GSM3_TV  	authentication_parameter_rand 	0x21 	 ; Authentication parameter RAND
 	GSM1_TV  	ciphering_key_sequence_number 	0x08 	 ; Ciphering key sequence number
}



MSG 	authentication_and_ciphering_response 	uplink 	19 ; Authentication and ciphering response
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	a_c_reference_number 	 ; A&C reference number
 	.0000  ; Spare half octet
 	GSM3_TV  	authentication_parameter_sres 	0x22 	 ; Authentication parameter SRES
 	GSM4_TLV  	gmobile_identity 	0x23 	 ; IMEISV
}



MSG 	authentication_and_ciphering_reject 	downlink 	20 ; Authentication and ciphering reject
{
 	GSM3_V  	msg_type 	 ; Message Type
}



MSG 	identity_request 	downlink 	21 ; Identity request
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM1_V  	identity_type_2 	 ; Identity type
 	GSM1_V  	force_to_standby 	 ; Force to standby
}



MSG 	identity_response 	uplink 	22 ; Identity response
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_LV  	gmobile_identity 	 ; Mobile identity
}



MSG 	gmm_status 	both 	32 ; GMM Status
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM3_V  	gmm_cause 	 ; GMM  cause
}



MSG 	gmm_information 	downlink 	33 ; GMM Information
{
 	GSM3_V  	msg_type 	 ; Message Type
 	GSM4_TLV  	full_network_name 	0x43 	 ; Full name for network
 	GSM4_TLV  	short_network_name 	0x45 	 ; Short name for network
 	GSM3_TV  	time_zone 	0x46 	 ; Network time zone
 	GSM3_TV  	time_zone_and_time 	0x47 	 ; Network time and time zone
 	GSM4_TLV  	lsa_identifier 	0x48 	 	%REL99% ; LSA identifier
 	GSM4_TLV  	daylight_save_time 	0x49 	 	%REL99% ; Message Item
}