FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/mac.pdf @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : mac.pdf ;*** Creation : Wed Mar 11 09:58:17 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : mac ;*** Document No. : 8441.111.03.009 ;*** Document Date : 2003-02-26 ;*** Document Status: BEING_PROCESSED ;*** Document Author: SAB ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:45:32 2007" PRAGMA LAST_MODIFIED "2003-02-26" PRAGMA ID_AND_VERSION "8441.111.03.009" CONST MAC_MAX_TIMESLOTS 8 ; defines the maximum number of uplink data blocks CONST MAC_BURST_PER_BLOCK 4 ; number of bursts that compose a block CONST MAC_MAX_DL_DATA_BLCKS 4 ; maximum number of dowlink data blocks VALTAB VAL_bcch_level VAL 0 MAC_RXLEV_MIN "minimum receive signal level as defined in GSM 05.08" VAL 63 MAC_RXLEV_MAX "maximum receive signal level as defined in GSM 05.08" VAL 0x80 MAC_RXLEV_NONE "no valid receive signal level present" VALTAB VAL_crc_error VAL 0 GRLC_CRC_PASS "radio block is correctly received" VAL 1 GRLC_CRC_FAIL "radio block is not correctly received" VAR nts "Maximum number of Timeslots for uplink TBF" B VAR fn "Framenumber" L VAR rlc_blocks_sent "number of transmitted rlc/mac blocks (except polling)" B VAR rx_no "Number of received Timeslots" S VAR block_status "Block Status" S VAR tn "Timeslot number" S VAR ul_block "Uplink block" S VAR dl_block "Downlink block" S VAR last_poll_resp "Last Poll Response" B VAR ta_value "Timing Advance Value" B VAR d_macc "Accumulated Metric" S VAR d_nerr "Number of estimated erorrs" S VAR burst_level "Signal level of the first valid downlink PDCH; ." B VAR radio_freq "Radio frequency of the TDMA frame; ." S VAR bcch_level "Signal level of BCCH serving Cell; ." B VAL @p_mac - VAL_bcch_level@ VAR crc_error "CRC error; ." B VAL @p_mac - VAL_crc_error@ VAR assignment_id "assignment identifier; ." L COMP ul_poll_resp "Uplink Poll Response" { block_status ; Block Status tn ; Timeslot number ul_block [13] ; Uplink block } COMP ul_data "Uplink Data" { block_status ; Block Status ul_block [28] ; Uplink block } COMP dl_data "Downlink Data" { block_status ; Block Status tn ; Timeslot number d_macc ; Accumulated Metric d_nerr ; Number of estimated erorrs dl_block [27] ; Downlink block } ; MAC_DATA_REQ 0x3200 ; MAC_DATA_IND 0x7200 ; MAC_READY_IND 0x7201 ; MAC_POLL_REQ 0x3201 ; MAC_PWR_CTRL_IND 0x7202 PRIM MAC_DATA_REQ 0x3200 { ul_data ; Uplink Data } PRIM MAC_DATA_IND 0x7200 { fn ; Framenumber rx_no ; Number of received Timeslots dl_data ; Downlink Data } PRIM MAC_READY_IND 0x7201 { nts ; Maximum number of Timeslots for uplink TBF fn ; Framenumber rlc_blocks_sent ; number of transmitted rlc/mac blocks (except polling) last_poll_resp ; Last Poll Response ta_value ; Timing Advance Value } PRIM MAC_POLL_REQ 0x3201 { ul_poll_resp ; Uplink Poll Response } PRIM MAC_PWR_CTRL_IND 0x7202 { assignment_id ; Assignment identifier crc_error ; CRC error bcch_level ; Signal level of BCCH serving Cell radio_freq [MAC_BURST_PER_BLOCK] ; Radio frequency of the TDMA frame burst_level [MAC_BURST_PER_BLOCK] ; Signal level of the first valid downlink PDCH }