FreeCalypso > hg > fc-magnetite

view cdg-hybrid/sap/mdl.pdf @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : mdl.pdf
;*** Creation       : Wed Mar 11 09:58:17 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mdl
;*** Document No.   : 6147.111.97.101
;*** Document Date  : 2002-04-19
;*** Document Status: BEING_PROCESSED
;*** Document Author: SBK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:45:46 2007"
PRAGMA 	LAST_MODIFIED 	"2002-04-19"
PRAGMA 	ID_AND_VERSION 	"6147.111.97.101"






VALTAB 	VAL_ch_type
VAL 	0 	CH_TYPE_SACCH 	"SACCH"
VAL 	1 	CH_TYPE_SDCCH 	"SDCCH"
VAL 	2 	CH_TYPE_FACCH 	"FACCH"
VAL 	3 	CH_TYPE_BCCH 	"BCCH"
VAL 	4 	CH_TYPE_CCCH 	"CCCH"
VAL 	5 	CH_TYPE_RACH 	"RACH"
VAL 	6 	CH_TYPE_NBR_CEL_BCCH 	"Neighbour Cell BCCH"

VALTAB 	VAL_sapi
VAL 	0 	SAPI_0 	"SAPI 0"
VAL 	3 	SAPI_3 	"SAPI 3"

VALTAB 	VAL_cs
VAL 	0 	CS_T200_EXP 	"T200 expired (N200 + 1 times)"
VAL 	1 	CS_REEST_REQ 	"re-establishment request"
VAL 	2 	CS_UNSOL_UA_RESP 	"unsolicited UA response"
VAL 	3 	CS_UNSOL_DM_RESP 	"unsolicited DM response"
VAL 	4 	CS_UNSOL_DM_RESP_MULT_FRM 	"unsolicited DM response, multiple frame established state"
VAL 	5 	CS_UNSOL_SUP_RESP 	"unsolicited supervisory response"
VAL 	6 	CS_SEQ_ERR 	"sequence error"
VAL 	7 	CS_UFRM_W_INC_PARA 	"U frame with incorrect parameters"
VAL 	8 	CS_SFRM_W_INC_PARA 	"S frame with incorrect parameters"
VAL 	9 	CS_IFRM_W_INC_MBIT 	"I frame with incorrect use of M bit"
VAL 	10 	CS_IFRM_W_INC_LEN 	"I frame with incorrect length"
VAL 	11 	CS_FRM_NOT_IMPL 	"frame not implemented"
VAL 	12 	CS_SABM_MULT_FRM 	"SABM command, multiple frame established state"
VAL 	13 	CS_SABM_NO_INFO 	"SABM command with information field not allowed in this state"
VAL 	14 	CS_NR_SEQ_ERR 	"sequence error, perform abnormal release"




VAR 	ch_type 	"channel type" 	B

VAL 	@p_mdl - VAL_ch_type@ 	

VAR 	sapi 	"service access point identifier" 	B

VAL 	@p_mdl - VAL_sapi@ 	

VAR 	cs 	"error cause" 	B

VAL 	@p_mdl - VAL_cs@ 	







; MDL_ERROR_IND 	0x80000004
; MDL_RELEASE_REQ 	0x80004004



PRIM 	MDL_ERROR_IND 	0x80000004
{
 	ch_type 	 ; channel type
 	sapi 	 ; service access point identifier
 	cs 	 ; error cause
}






PRIM 	MDL_RELEASE_REQ 	0x80004004
{
 	ch_type 	 ; channel type
 	sapi 	 ; service access point identifier
}