FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/rrrrlp.pdf @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : rrrrlp.pdf ;*** Creation : Wed Mar 11 09:58:48 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : rrrrlp ;*** Document No. : 0000.000.00.002 ;*** Document Date : 2002-09-10 ;*** Document Status: BEING_PROCESSED ;*** Document Author: VK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:53:22 2007" PRAGMA LAST_MODIFIED "2002-09-10" PRAGMA ID_AND_VERSION "0000.000.00.002" CONST MAX_SDU_LEN 1 ; CONST MAX_NCELL_L1 12 ; Max no. of NC layer 1 is able to measure CONST MAX_NCELL_EOTD 15 ; Max no. of NC reported in the Measurement Assistance Data Element (3GPP 04.31) CONST MAX_NCELL_EOTD_SI 32 ; Max no. of NC reported in the Measurement Assistance Data SI List Element (3GPP 04.31) VAR dummy "Dummy" B VAR l_buf "length in bits" S VAR o_buf "offset in bits" S VAR buf "bit buffer" B VAR cr "Command or Response" B COMP sdu "Service Data Unit" { l_buf ; length in bits o_buf ; offset in bits buf [MAX_SDU_LEN] ; bit buffer } ; RRRRLP_DATA_IND 0x80004041 ; RRRRLP_DATA_REQ 0x80000041 ; RRRRLP_DATA_CNF 0x80014041 ; RRRRLP_ERROR_IND 0x80024041 PRIM RRRRLP_DATA_IND 0x80004041 { cr ; Command / Response sdu ; APDU_IND } PRIM RRRRLP_DATA_REQ 0x80000041 { cr ; Command / Response sdu ; APDU_REQ } PRIM RRRRLP_DATA_CNF 0x80014041 { dummy ; Dummy } PRIM RRRRLP_ERROR_IND 0x80024041 { dummy ; Dummy }