FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/m_sm.val @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 56abf6cf8a0b |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : m_sm.val | | SOURCE : "__out__\g23m_dfile\msg\sm.mdf" | | LastModified : "2002-04-29" | | IdAndVersion : "8441.605.99.007" | | SrcFileTime : "Mon Nov 24 15:51:04 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:14 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef M_SM_VAL #define M_SM_VAL #define CDG_ENTER__M_SM_VAL #define CDG_ENTER__FILENAME _M_SM_VAL #define CDG_ENTER__M_SM_VAL__FILE_TYPE CDGINC #define CDG_ENTER__M_SM_VAL__LAST_MODIFIED _2002_04_29 #define CDG_ENTER__M_SM_VAL__ID_AND_VERSION _8441_605_99_007 #define CDG_ENTER__M_SM_VAL__SRC_FILE_TIME _Mon_Nov_24_15_51_04_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__M_SM_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_nsapi_val */ #define VAL_NSAPI_VAL___DEF (0x0) /* reserved */ #define NSAPI_5 (0x5) /* NSAPI 5 */ #define NSAPI_6 (0x6) /* NSAPI 6 */ #define NSAPI_7 (0x7) /* NSAPI 7 */ #define NSAPI_8 (0x8) /* NSAPI 8 */ #define NSAPI_9 (0x9) /* NSAPI 9 */ #define NSAPI_10 (0xa) /* NSAPI 10 */ #define NSAPI_11 (0xb) /* NSAPI 11 */ #define NSAPI_12 (0xc) /* NSAPI 12 */ #define NSAPI_13 (0xd) /* NSAPI 13 */ #define NSAPI_14 (0xe) /* NSAPI 14 */ #define NSAPI_15 (0xf) /* NSAPI 15 */ /* * Value constants for VAL_delay */ #define VAL_DELAY___DEF (0x0) /* Delay class 4 (best effort) */ #define DELAY_SUB (0x0) /* Subscribed delay class (uplink only) */ #define DELAY_RES_DL (0x0) /* Reserved (downlink only) */ #define DELAY_1 (0x1) /* Delay class 1 */ #define DELAY_2 (0x2) /* Delay class 2 */ #define DELAY_3 (0x3) /* Delay class 3 */ #define DELAY_4 (0x4) /* Delay class 4 (best effort) */ #define DELAY_RES (0x7) /* Reserved */ /* * Value constants for VAL_reliability */ #define VAL_RELIABILITY___DEF (0x0) /* Unacknowledged GTP and LLC; Acknowledged RLC, Protected data */ #define RELY_SUB (0x0) /* Subscribed reliability class (uplink only) */ #define RELY_RES_DL (0x0) /* Reserved (dowwnlink only) */ #define RELY_1 (0x1) /* Acknowledged GTP, LLC, and RLC; Protected data */ #define RELY_2 (0x2) /* Unacknowledged GTP; Acknowledged LLC and RLC, Protected data */ #define RELY_3 (0x3) /* Unacknowledged GTP and LLC; Acknowledged RLC, Protected data */ #define RELY_4 (0x4) /* Unacknowledged GTP, LLC, and RLC, Protected data */ #define RELY_5 (0x5) /* Unacknowledged GTP, LLC, and RLC, Unprotected data */ #define RELY_RES (0x7) /* Reserved */ /* * Value constants for VAL_sapi */ #define VAL_SAPI___DEF (0x0) /* reserved */ #define SAPI_3 (0x3) /* SAPI 3 */ #define SAPI_5 (0x5) /* SAPI 5 */ #define SAPI_9 (0x9) /* SAPI 9 */ #define SAPI_11 (0xb) /* SAPI 11 */ /* * Value constants for VAL_peak */ #define VAL_PEAK___DEF (0x0) /* Up to 1000 octet/s */ #define PEAK_SUB (0x0) /* Subscribed peak throughput (uplink only) */ #define PEAK_RES_DL (0x0) /* reserved (downlink only) */ #define PEAK_1000 (0x1) /* Up to 1000 octet/s */ #define PEAK_2000 (0x2) /* Up to 2000 octet/s */ #define PEAK_4000 (0x3) /* Up to 4000 octet/s */ #define PEAK_8000 (0x4) /* Up to 8000 octet/s */ #define PEAK_16000 (0x5) /* Up to 16000 octet/s */ #define PEAK_32000 (0x6) /* Up to 32000 octet/s */ #define PEAK_64000 (0x7) /* Up to 64000 octet/s */ #define PEAK_128000 (0x8) /* Up to 128000 octet/s */ #define PEAK_256000 (0x9) /* Up to 256000 octet/s */ #define PEAK_RES (0xf) /* Reserved */ /* * Value constants for VAL_precedence */ #define VAL_PRECEDENCE___DEF (0x0) /* Normal Priority */ #define PRECED_SUB (0x0) /* Subscribed precedence (uplink only) */ #define PRECED_RES_DL (0x0) /* Reserved (downlink only) */ #define PRECED_HIGH (0x1) /* High priority */ #define PRECED_NORM (0x2) /* Normal Priority */ #define PRECED_LOW (0x3) /* Low priority */ #define PRECED_RES (0x7) /* Reserved */ /* * Value constants for VAL_mean */ #define VAL_MEAN___DEF (0x0) /* Best effort */ #define MEAN_SUB (0x0) /* Subscribed mean throughput (uplink only) */ #define MEAN_RES_DL (0x0) /* reserved (downlink only) */ #define MEAN_100 (0x1) /* 100 octet/h */ #define MEAN_200 (0x2) /* 200 octet/h */ #define MEAN_500 (0x3) /* 500 octet/h */ #define MEAN_1000 (0x4) /* 1000 octet/h */ #define MEAN_2000 (0x5) /* 2000 octet/h */ #define MEAN_5000 (0x6) /* 5000 octet/h */ #define MEAN_10000 (0x7) /* 10000 octet/h */ #define MEAN_20000 (0x8) /* 20000 octet/h */ #define MEAN_50000 (0x9) /* 50000 octet/h */ #define MEAN_100000 (0xa) /* 100000 octet/h */ #define MEAN_200000 (0xb) /* 200000 octet/h */ #define MEAN_500000 (0xc) /* 500000 octet/h */ #define MEAN_1000000 (0xd) /* 1000000 octet/h */ #define MEAN_2000000 (0xe) /* 2000000 octet/h */ #define MEAN_5000000 (0xf) /* 5000000 octet/h */ #define MEAN_10000000 (0x10) /* 10000000 octet/h */ #define MEAN_20000000 (0x11) /* 20000000 octet/h */ #define MEAN_50000000 (0x12) /* 50000000 octet/h */ #define MEAN_RES (0x1e) /* Reserved */ #define MEAN_BEST (0x1f) /* Best effort */ /* * Value constants for VAL_pdp_type_org */ #define VAL_PDP_TYPE_ORG___DEF (0x0) /* ETSI allocated address (e.g. X.121) */ #define ETSI_ORG (0x0) /* ETSI allocated address (e.g. X.121) */ #define IETF_ORG (0x1) /* IETF allocated address */ #define PDP_MT (0xf) /* Dynamic PDP addressing is applied, (uplink only) */ /* * Value constants for VAL_pdp_type_no */ #define VAL_PDP_TYPE_NO___DEF (0x0) /* IPv4 address */ #define X121_TYPE (0x0) /* X.121 address */ #define IP4_TYPE (0x21) /* IPv4 address */ #define IP6_TYPE (0x57) /* IPv6 address */ /* * Value constants for VAL_radio_prio_val */ #define VAL_RADIO_PRIO_VAL___DEF (0x0) /* priority level 4 (lowest) */ #define RADIO_PRIO_1 (0x1) /* priority level 1 (highest) */ #define RADIO_PRIO_2 (0x2) /* priority level 2 */ #define RADIO_PRIO_3 (0x3) /* priority level 3 */ #define RADIO_PRIO_4 (0x4) /* priority level 4 (lowest) */ /* * Value constants for VAL_sm_cause_val */ #define VAL_SM_CAUSE_VAL___DEF (0x0) /* Service option temporarily out of order ( received by MS) */ #define LLC_OR_SNDCP (0x19) /* LLC or SNDCP failure */ #define INSUF_RES (0x1a) /* Insufficient resources */ #define APN_MISS (0x1b) /* Missing or unknown APN */ #define UNK_PDP (0x1c) /* Unknown PDP address or PDP type */ #define AUTH_FAIL (0x1d) /* User Aauthentication failed */ #define GGSN_ACT_REJ (0x1e) /* Activation rejected by GGSN */ #define UNSPEC_ACT_REJ (0x1f) /* Activation rejected, unspecified */ #define SERV_OPT_NO_SP (0x20) /* Service option not supported */ #define SERV_OPT_NO_SC (0x21) /* Requested service option not subscribed */ #define SERV_OPT_TMP (0x22) /* Service option temporarily out of order */ #define NSAPI_USED (0x23) /* NSAPI already used */ #define REGULAR (0x24) /* Regular deactivation */ #define QOS_NOT_ACC (0x25) /* QoS not accepted */ #define NET_FAIL (0x26) /* Network failure */ #define REACT_REQ (0x27) /* Reactivation required */ #define SEM_INCORRECT (0x5f) /* Semantically incorrect message */ #define TI_INVAL (0x51) /* Invalid transaction identifier value */ #define MAND_INF_INVAL (0x60) /* Invalid mandatory information */ #define MSG_T_NON_X (0x61) /* Message type non-existent or not implemented */ #define MSG_T_NOT_COMP (0x62) /* Message type not compatible with the protocol state */ #define IE_NON_X (0x63) /* Information element non-existent or not implemented */ #define COND_IE (0x64) /* Conditional IE error */ #define NO_STATE_COMP (0x65) /* Message not compatible with the protocol state */ #define UNSPEC (0x6f) /* Protocol error, unspecified */ /* * user defined constants */ #define L3MAX (0xfb) #include "CDG_LEAVE.h" #endif