FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_ph.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_ph.h | | SOURCE : "__out__\g23m_dfile\prim\ph.pdf" | | LastModified : "2001-10-26" | | IdAndVersion : "6147.112.01.100" | | SrcFileTime : "Tue May 18 17:03:14 2004" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_PH_H #define P_PH_H #define CDG_ENTER__P_PH_H #define CDG_ENTER__FILENAME _P_PH_H #define CDG_ENTER__P_PH_H__FILE_TYPE CDGINC #define CDG_ENTER__P_PH_H__LAST_MODIFIED _2001_10_26 #define CDG_ENTER__P_PH_H__ID_AND_VERSION _6147_112_01_100 #define CDG_ENTER__P_PH_H__SRC_FILE_TIME _Tue_May_18_17_03_14_2004 #include "CDG_ENTER.h" #undef CDG_ENTER__P_PH_H #undef CDG_ENTER__FILENAME #include "p_ph.val" #include "p_mphc.h" /* * End of substructure section, begin of primitive definition section */ #ifndef __T_PH_READY_TO_SEND__ #define __T_PH_READY_TO_SEND__ /* * * CCDGEN:WriteStruct_Count==1823 */ typedef struct { U8 ch_type; /*< 0: 1> Layer 2 channel-type */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_PH_READY_TO_SEND; #endif #ifndef __T_PH_DATA_REQ__ #define __T_PH_DATA_REQ__ /* * * CCDGEN:WriteStruct_Count==1824 */ typedef struct { U8 ch_type; /*< 0: 1> Layer 2 channel-type */ U8 dummy; /*< 1: 1> dummy not used */ U8 _align0; /*< 2: 1> alignment */ U8 _align1; /*< 3: 1> alignment */ T_sdu sdu; /*< 4: ? > message unit */ } T_PH_DATA_REQ; #endif #ifndef __T_PH_TRACE_IND__ #define __T_PH_TRACE_IND__ /* * * CCDGEN:WriteStruct_Count==1825 */ typedef struct { U8 dummy; /*< 0: 1> dummy not used */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_PH_TRACE_IND; #endif #include "CDG_LEAVE.h" #endif