FreeCalypso > hg > fc-magnetite

view cdg3/cdginc-conservative/p_aci.val @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_aci.val                                                      |
| SOURCE  : "sap\aci.pdf"                                                  |
| LastModified : "2004-06-01"                                              |
| IdAndVersion : "8411.105.00.205"                                         |
| SrcFileTime  : "Thu Nov 29 09:29:50 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_ACI_VAL
#define P_ACI_VAL


#define CDG_ENTER__P_ACI_VAL

#define CDG_ENTER__FILENAME _P_ACI_VAL
#define CDG_ENTER__P_ACI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_ACI_VAL__LAST_MODIFIED _2004_06_01
#define CDG_ENTER__P_ACI_VAL__ID_AND_VERSION _8411_105_00_205

#define CDG_ENTER__P_ACI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_29_50_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_ACI_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cmd_src
 */
#define CMD_SRC_INT                    (0x0)      /* Command from internal application */
#define CMD_SRC_EXT                    (0x1)      /* Command from external application */
#define CMD_SRC_UNKNOWN                (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_urt_stat
 */
#define URT_RDY_TO_SEND                (0x0)      /* URT is ready to accept new data */
#define URT_DATA_AVAIL                 (0x1)      /* URT has data available         */
#define URT_STAT_UNKNOWN               (0xff)     /* Reserved                       */

/*
 * Value constants for VAL_cause
 */
#define ABT_ABORT_DATA                 (0x0)      /* Abort data mode                */
#define ABT_ABORT_CMD                  (0x1)      /* Abort current command          */

/*
 * Value constants for VAL_ackflg
 */
#define ACI_NAK                        (0x0)      /* Not Acknowledge                */
#define ACI_ACK                        (0x1)      /* Acknowledge                    */

/*
 * user defined constants
 */
#define MAX_CMD_LEN                    (0x17c)    
#define MAX_TRC_LEN                    (0x50)     
#define MAX_DATA_LEN                   (0xc8)     

#include "CDG_LEAVE.h"


#endif