FreeCalypso > hg > fc-magnetite

view cdg3/cdginc-conservative/p_mac.val @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_mac.val                                                      |
| SOURCE  : "sap\mac.pdf"                                                  |
| LastModified : "2003-02-26"                                              |
| IdAndVersion : "8441.111.03.009"                                         |
| SrcFileTime  : "Thu Nov 29 09:45:32 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_MAC_VAL
#define P_MAC_VAL


#define CDG_ENTER__P_MAC_VAL

#define CDG_ENTER__FILENAME _P_MAC_VAL
#define CDG_ENTER__P_MAC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MAC_VAL__LAST_MODIFIED _2003_02_26
#define CDG_ENTER__P_MAC_VAL__ID_AND_VERSION _8441_111_03_009

#define CDG_ENTER__P_MAC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_45_32_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_MAC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_bcch_level
 */
#define MAC_RXLEV_MIN                  (0x0)      /* minimum receive signal level as defined in GSM 05.08 */
#define MAC_RXLEV_MAX                  (0x3f)     /* maximum receive signal level as defined in GSM 05.08 */
#define MAC_RXLEV_NONE                 (0x80)     /* no valid receive signal level present */

/*
 * Value constants for VAL_crc_error
 */
#define GRLC_CRC_PASS                  (0x0)      /* radio block is correctly received */
#define GRLC_CRC_FAIL                  (0x1)      /* radio block is not correctly received */

/*
 * user defined constants
 */
#define MAC_MAX_TIMESLOTS              (0x8)      
#define MAC_BURST_PER_BLOCK            (0x4)      
#define MAC_MAX_DL_DATA_BLCKS          (0x4)      

#include "CDG_LEAVE.h"


#endif