view cdg3/cdginc-conservative/p_rrlc.val @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_rrlc.val                                                     |
| SOURCE  : "sap\rrlc.pdf"                                                 |
| LastModified : "2002-10-11"                                              |
| IdAndVersion : "8443.101.02.008"                                         |
| SrcFileTime  : "Thu Nov 29 09:52:52 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_RRLC_VAL
#define P_RRLC_VAL


#define CDG_ENTER__P_RRLC_VAL

#define CDG_ENTER__FILENAME _P_RRLC_VAL
#define CDG_ENTER__P_RRLC_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_RRLC_VAL__LAST_MODIFIED _2002_10_11
#define CDG_ENTER__P_RRLC_VAL__ID_AND_VERSION _8443_101_02_008

#define CDG_ENTER__P_RRLC_VAL__SRC_FILE_TIME _Thu_Nov_29_09_52_52_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_RRLC_VAL

#undef CDG_ENTER__FILENAME


/*
 * Value constants for VAL_cause
 */
#define LCS_OK                         (0x0)      /* no error                       */
#define LCS_WRONG_BTS                  (0xa)      /* Serving Cell BTS differs from Reference BTS */
#define LCS_HANDOVER                   (0x14)     /* handover occured during Position Measurement procedure */

/*
 * Value constants for VAL_sb_flag
 */
#define EOTD_INVALID                   (0x0)      /* invalid data                   */
#define EOTD_VALID                     (0x1)      /* valid data                     */

/*
 * Value constants for VAL_eotd_mode
 */
#define EOTD_IDLE                      (0x0)      /* Idle mode                      */
#define EOTD_DEDIC                     (0x1)      /* Dedicated or packet mode       */

/*
 * Value constants for VAL_exp_otd
 */

/*
 * Value constants for VAL_fn
 */
#define FNMAX                          (0x297000) /* max Frame Number + 1 (26*51*2048) */

/*
 * Value constants for VAL_mfrm_offset
 */

/*
 * Value constants for VAL_otd_type
 */
#define ROUGH_RTD                      (0x0)      /* only rough RTD has been provided by the NW */
#define EXPECTED_OTD                   (0x1)      /* only expectedOTD has been provided by the NW */
#define BOTH_OTD                       (0x2)      /* Both OTD / RTD types have been provided by the NW */

/*
 * Value constants for VAL_rough_rtd
 */

/*
 * Value constants for VAL_tav
 */
#define TA_NOT_AVAIL                   (0xff)     /* no Timing Advance in Idle Mode */

/*
 * Value constants for VAL_uncertainty
 */
#define UNC_MAX_2BIT                   (0x0)      /* uncertainty in bits. 0 - 2 bits */
#define UNC_MAX_4BIT                   (0x1)      /* uncertainty in bits. 3 - 4 bits */
#define UNC_MAX_8BIT                   (0x2)      /* uncertainty in bits. 5 - 8 bits */
#define UNC_MAX_12BIT                  (0x3)      /* uncertainty in bits. 9 - 12 bits */
#define UNC_MAX_16BIT                  (0x4)      /* uncertainty in bits. 13 - 16 bits */
#define UNC_MAX_22BIT                  (0x5)      /* uncertainty in bits. 17 - 22 bits */
#define UNC_MAX_30BIT                  (0x6)      /* uncertainty in bits. 23 - 30 bits */
#define UNC_GT_30BIT                   (0x7)      /* uncertainty in bits.  > 30 bits */

/*
 * user defined constants
 */
#define MAX_NCELL_EOTD_L1              (0xc)      
#define MAX_NCELL_EOTD                 (0xf)      
#define MAX_NCELL_EOTD_SI              (0x20)     
#define XCOR_NO                        (0x12)     

#include "CDG_LEAVE.h"


#endif