FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_cl.val @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_cl.val | | SOURCE : "sap\cl.pdf" | | LastModified : "2004-06-08" | | IdAndVersion : "8010.149.04.012" | | SrcFileTime : "Thu Nov 29 09:38:38 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : CL * COMPATIBILITY_DEFINES : NO * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_CL_VAL #define P_CL_VAL #define CDG_ENTER__P_CL_VAL #define CDG_ENTER__FILENAME _P_CL_VAL #define CDG_ENTER__P_CL_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_CL_VAL__LAST_MODIFIED _2004_06_08 #define CDG_ENTER__P_CL_VAL__ID_AND_VERSION _8010_149_04_012 #define CDG_ENTER__P_CL_VAL__SRC_FILE_TIME _Thu_Nov_29_09_38_38_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_CL_VAL #undef CDG_ENTER__FILENAME #include "p_8010_152_ps_include.val" /* Access values independent from the corresponding h-file. */ /* * Value constants for VAL_qos_conv_res */ #define CL_CONV_OK (0x1) /* Conversion successful. */ #define CL_CONV_FAILED (0x0) /* Conversion failed */ /* * user defined constants */ #define CL_DUMMY (0xff) #include "CDG_LEAVE.h" #endif