FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_rrlp.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrlp.h | | SOURCE : "sap\rrlp.pdf" | | LastModified : "2002-11-13" | | IdAndVersion : "8443.102.02.100" | | SrcFileTime : "Thu Nov 29 09:53:06 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRLP_H #define P_RRLP_H #define CDG_ENTER__P_RRLP_H #define CDG_ENTER__FILENAME _P_RRLP_H #define CDG_ENTER__P_RRLP_H__FILE_TYPE CDGINC #define CDG_ENTER__P_RRLP_H__LAST_MODIFIED _2002_11_13 #define CDG_ENTER__P_RRLP_H__ID_AND_VERSION _8443_102_02_100 #define CDG_ENTER__P_RRLP_H__SRC_FILE_TIME _Thu_Nov_29_09_53_06_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRLP_H #undef CDG_ENTER__FILENAME #include "p_rrlp.val" #ifndef __T_assist_data__ #define __T_assist_data__ /* * Assistance Data * CCDGEN:WriteStruct_Count==2995 */ typedef struct { U16 arfcn; /*< 0: 2> Channel number */ U8 bsic; /*< 2: 1> Base station ID code */ U8 mfrm_offset; /*< 3: 1> multiframe offset */ U8 otd_type; /*< 4: 1> OTD type */ U8 _align0; /*< 5: 1> alignment */ U16 exp_otd; /*< 6: 2> expectedOTD */ U8 uncertainty; /*< 8: 1> Uncertainty of expected OTD */ U8 _align1; /*< 9: 1> alignment */ U16 rough_rtd; /*< 10: 2> rough RTD */ } T_assist_data; #endif #ifndef __T_bts_data__ #define __T_bts_data__ /* * BTS data * CCDGEN:WriteStruct_Count==2996 */ typedef struct { U8 bsic; /*< 0: 1> Base station ID code */ U8 _align0; /*< 1: 1> alignment */ U16 arfcn; /*< 2: 2> Channel number */ U8 quality; /*< 4: 1> 5 bit encoding: ranges */ U8 num_measurements; /*< 5: 1> Number of measurements */ U8 _align1; /*< 6: 1> alignment */ U8 _align2; /*< 7: 1> alignment */ S32 timing_offset; /*< 8: 4> Timing offset */ S32 timing_advance; /*< 12: 4> Timing advance */ } T_bts_data; #endif #ifndef __T_ref_bts_data__ #define __T_ref_bts_data__ /* * Reference BTS data * CCDGEN:WriteStruct_Count==2997 */ typedef struct { U16 cell_id; /*< 0: 2> Cell ID */ U16 lac; /*< 2: 2> Location area code */ U8 quality; /*< 4: 1> 5 bit encoding: ranges */ U8 num_measurements; /*< 5: 1> Number of measurements */ U8 _align0; /*< 6: 1> alignment */ U8 _align1; /*< 7: 1> alignment */ S32 timing_offset; /*< 8: 4> Timing offset */ U8 total_neigh_bts; /*< 12: 1> Total number of neighbor BTS */ U8 _align2; /*< 13: 1> alignment */ U8 _align3; /*< 14: 1> alignment */ U8 _align4; /*< 15: 1> alignment */ T_bts_data bts_data[R_MAX_REF_NEIGH_BTS]; /*< 16:240> BTS data */ U16 frame_number; /*<256: 2> Frame number */ U8 _align5; /*<258: 1> alignment */ U8 _align6; /*<259: 1> alignment */ S32 timing_advance; /*<260: 4> Timing advance */ } T_ref_bts_data; #endif #ifndef __T_timing_data__ #define __T_timing_data__ /* * Output of the position algorithm * CCDGEN:WriteStruct_Count==2998 */ typedef struct { U16 mcc; /*< 0: 2> Mobile country code */ U16 mnc; /*< 2: 2> Mobile country code */ U8 reference_relation; /*< 4: 1> 0, 1 or 2, only used when there are 2 ref cells and 3 measurement sets */ U8 time_slot; /*< 5: 1> Time slot number */ U8 std_resolution; /*< 6: 1> Standard resolution in meters */ U8 num_measurement_sets; /*< 7: 1> Number of measurement sets */ U8 num_reference_cells; /*< 8: 1> Number of reference cells */ U8 ta_correction_present; /*< 9: 1> */ U16 ta_correction; /*< 10: 2> TA correction */ T_ref_bts_data ref_bts_data[R_NUM_MEAS_SETS]; /*< 12:792> Reference BTS data */ } T_timing_data; #endif /* * End of substructure section, begin of primitive definition section */ #ifndef __T_RRLP_POS_IND__ #define __T_RRLP_POS_IND__ /* * * CCDGEN:WriteStruct_Count==2999 */ typedef struct { U8 _align0; /*< 0: 1> alignment */ U8 _align1; /*< 1: 1> alignment */ U8 v_assist_data; /*< 2: 1> valid-flag */ U8 c_assist_data; /*< 3: 1> counter */ T_assist_data assist_data[MAX_NCELL_EOTD]; /*< 4:180> Assistance Data */ U8 loc_method; /*<184: 1> Location method */ U8 pos_method; /*<185: 1> Position method */ U8 _align2; /*<186: 1> alignment */ U8 v_arfcn; /*<187: 1> valid-flag */ U16 arfcn; /*<188: 2> Channel number */ U8 v_bsic; /*<190: 1> valid-flag */ U8 bsic; /*<191: 1> Base station ID code */ } T_RRLP_POS_IND; #endif #ifndef __T_RRLP_POS_RES__ #define __T_RRLP_POS_RES__ /* * * CCDGEN:WriteStruct_Count==3000 */ typedef struct { T_timing_data timing_data; /*< 0:804> Output of the position algorithm */ } T_RRLP_POS_RES; #endif #ifndef __T_RRLP_ERROR_REQ__ #define __T_RRLP_ERROR_REQ__ /* * * CCDGEN:WriteStruct_Count==3001 */ typedef struct { U8 cause; /*< 0: 1> Cause Id Error */ U8 _align0; /*< 1: 1> alignment */ U8 _align1; /*< 2: 1> alignment */ U8 _align2; /*< 3: 1> alignment */ } T_RRLP_ERROR_REQ; #endif #include "CDG_LEAVE.h" #endif