view cdg3/sap/8010_128_sm_sap.pdf @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_128_sm_sap.pdf
;*** Creation       : Wed Mar 11 09:57:47 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_128_sm_sap
;*** Document No.   : 8010.128.02.009
;*** Document Date  : 2004-06-08
;*** Document Status: APPROVED
;*** Document Author: rpk
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:26:48 2007"
PRAGMA 	LAST_MODIFIED 	"2004-06-08"
PRAGMA 	ID_AND_VERSION 	"8010.128.02.009"
PRAGMA 	PREFIX 	SM 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	YES 	; Compatible to the old #defines















; SM_ACTIVATE_STARTED_IND 	0x80004090
; SM_ACTIVATE_IND 	0x80014090
; SM_ACTIVATE_RES 	0x80000090
; SM_DEACTIVATE_IND 	0x80024090
; SM_DEACTIVATE_RES 	0x80010090
; SM_MODIFY_IND 	0x80034090
; SM_MODIFY_RES 	0x80020090
; SM_STATUS_REQ 	0x80030090
; SM_COMPRESSION_REQ 	0x80040090



PRIM 	SM_ACTIVATE_STARTED_IND 	0x80004090
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Radio Access Technology
}






PRIM 	SM_ACTIVATE_IND 	0x80014090
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - sapi@ 	sapi 	 ; LLC service access point identifier
 	EXTERN @p_8010_152_ps_include - radio_prio@ 	radio_prio 	 ; radio priority
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
 	EXTERN @p_8010_152_ps_include - pkt_flow_id@ 	pkt_flow_id 	 ; packet flow identifier
 	< () 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	> 	 ; compression parameters; GSM Only
}






PRIM 	SM_ACTIVATE_RES 	0x80000090
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	< () 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	> 	 ; compression parameters; GSM Only
}






PRIM 	SM_DEACTIVATE_IND 	0x80024090
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; set of network layer service access point identifiers
 	EXTERN @p_8010_152_ps_include - rel_ind@ 	rel_ind 	 ; LLC Release indicator
}






PRIM 	SM_DEACTIVATE_RES 	0x80010090
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; set of network layer service access point identifier
}






PRIM 	SM_MODIFY_IND 	0x80034090
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
 	EXTERN @p_8010_152_ps_include - sapi@ 	sapi 	 ; LLC service access point identifier
 	EXTERN @p_8010_152_ps_include - radio_prio@ 	radio_prio 	 ; radio priority
 	EXTERN @p_8010_152_ps_include - pkt_flow_id@ 	pkt_flow_id 	 ; packet flow identifier
 	EXTERN @p_8010_152_ps_include - qos@ 	qos 	 ; quality of service
}






PRIM 	SM_MODIFY_RES 	0x80020090
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; network layer service access point identifier
}






PRIM 	SM_STATUS_REQ 	0x80030090
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; set of network layer service access point identifiers
 	EXTERN @p_8010_152_ps_include - sapi@ 	sapi 	 ; LLC service access point identifier
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Cause of the error
}






PRIM 	SM_COMPRESSION_REQ 	0x80040090
{
 	EXTERN @p_8010_137_nas_include - nsapi_set@ 	nsapi_set 	 ; Set of network layer service access point identifiers
 	EXTERN @p_8010_137_nas_include - comp_params@ 	comp_params 	 ; compression parameters
}