FreeCalypso > hg > fc-magnetite

view cdg3/sap/8010_134_mmpm_sap.pdf @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_134_mmpm_sap.pdf
;*** Creation       : Wed Mar 11 09:57:48 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_134_mmpm_sap
;*** Document No.   : 8010.134.02.007
;*** Document Date  : 2003-07-29
;*** Document Status: APPROVED
;*** Document Author: CLA
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:27:04 2007"
PRAGMA 	LAST_MODIFIED 	"2003-07-29"
PRAGMA 	ID_AND_VERSION 	"8010.134.02.007"
PRAGMA 	PREFIX 	MMPM 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines



CONST 	MAX_N_PDU_NUMBER_LIST 	16 	; Maximum Length of Receive N-PDU Number list



VALTAB 	VAL_establish_cause
VAL 	1 	CAUSE_ESTABL_ORIG_CONVERSATIONAL 	"Originating conversational call"
VAL 	2 	CAUSE_ESTABL_ORIG_STREAMING 	"Originating streaming call"
VAL 	3 	CAUSE_ESTABL_ORIG_INTERACTIVE 	"Originating interactive call"
VAL 	4 	CAUSE_ESTABL_ORIG_BACKGROUND 	"Originating background call"
VAL 	5 	CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING 	"Originating high priority signalling"
VAL 	6 	CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING 	"Originating low priority signalling"

VALTAB 	VAL_reg_state
VAL 	0 	RS_DEREGISTERED 	"GMM context for SMS is removed"
VAL 	1 	RS_REGISTERED 	"GMM context for SMS is built"




VAR 	establish_cause 	"Establish Cause" 	B

VAL 	@p_8010_134_mmpm_sap - VAL_establish_cause@ 	

VAR 	nsapi_set 	"PDP Context Status" 	S


VAR 	receive_n_pdu_number_val 	"Receive N-PDU Number value" 	B


VAR 	reg_state 	"Registration State" 	B

VAL 	@p_8010_134_mmpm_sap - VAL_reg_state@ 	




COMP 	npdu_list 	 "list of received N-PDU numbers"
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; NSAPI
 	receive_n_pdu_number_val 	 ; Receive N-PDU Number value
}






; MMPM_ATTACH_IND 	0x800B4096
; MMPM_DETACH_IND 	0x80004096
; MMPM_PDP_CONTEXT_STATUS_REQ 	0x80000096
; MMPM_RAT_CHANGE_COMPLETED_IND 	0x80014096
; MMPM_RAT_CHANGE_IND 	0x80024096
; MMPM_REESTABLISH_REQ 	0x80010096
; MMPM_REESTABLISH_CNF 	0x80034096
; MMPM_REESTABLISH_REJ 	0x80044096
; MMPM_REG_STATE_REQ 	0x80020096
; MMPM_REG_STATE_CNF 	0x80054096
; MMPM_ERROR_IND 	0x80064096
; MMPM_RESUME_IND 	0x80074096
; MMPM_SEQUENCE_IND 	0x80084096
; MMPM_SEQUENCE_RES 	0x80030096
; MMPM_SUSPEND_IND 	0x80094096
; MMPM_UNITDATA_IND 	0x800A4096
; MMPM_UNITDATA_REQ 	0x80040096



PRIM 	MMPM_ATTACH_IND 	0x800B4096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Primitive Item
}






PRIM 	MMPM_DETACH_IND 	0x80004096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_PDP_CONTEXT_STATUS_REQ 	0x80000096
{
 	nsapi_set 	 ; PDP Context Status
}






PRIM 	MMPM_RAT_CHANGE_COMPLETED_IND 	0x80014096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Radio Access Technology
}






PRIM 	MMPM_RAT_CHANGE_IND 	0x80024096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Radio Access Technology
}






PRIM 	MMPM_REESTABLISH_REQ 	0x80010096
{
 	establish_cause 	 ; Establish Cause
}






PRIM 	MMPM_REESTABLISH_CNF 	0x80034096
{
}






PRIM 	MMPM_REESTABLISH_REJ 	0x80044096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_REG_STATE_REQ 	0x80020096
{
}






PRIM 	MMPM_REG_STATE_CNF 	0x80054096
{
 	reg_state 	 ; Registration State
}






PRIM 	MMPM_ERROR_IND 	0x80064096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_RESUME_IND 	0x80074096
{
}






PRIM 	MMPM_SEQUENCE_IND 	0x80084096
{
 	npdu_list 	[1..MAX_N_PDU_NUMBER_LIST] 	 ; list of received N-PDU numbers
}






PRIM 	MMPM_SEQUENCE_RES 	0x80030096
{
 	npdu_list 	[1..MAX_N_PDU_NUMBER_LIST] 	 ; list of received N-PDU numbers
}






PRIM 	MMPM_SUSPEND_IND 	0x80094096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_UNITDATA_IND 	0x800A4096
{
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; Service Data Unit
}






PRIM 	MMPM_UNITDATA_REQ 	0x80040096
{
 	EXTERN @p_8010_137_nas_include - org_entity@ 	org_entity 	 ; Originating entity
 	< () 	establish_cause 	> 	 ; Establish Cause
 	< () 	nsapi_set 	> 	 ; PDP Context Status
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; Service Data Unit
}