FreeCalypso > hg > fc-magnetite
view cdg3/sap/8010_142_smreg_sap.pdf @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : 8010_142_smreg_sap.pdf ;*** Creation : Wed Mar 11 09:57:52 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : 8010_142_smreg_sap ;*** Document No. : 8010.142.02.011 ;*** Document Date : 2003-08-22 ;*** Document Status: APPROVED ;*** Document Author: MVJ ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:28:36 2007" PRAGMA LAST_MODIFIED "2003-08-22" PRAGMA ID_AND_VERSION "8010.142.02.011" PRAGMA PREFIX SMREG ; Prefix for this document PRAGMA ALLWAYS_ENUM_IN_VAL_FILE YES ; Enumeration values in value file PRAGMA ENABLE_GROUP NO ; Enable h-file grouping PRAGMA COMPATIBILITY_DEFINES NO ; Compatible to the old #defines VALTAB VAL_pdp_type VAL 1 PDP_PPP "PDP type PPP" VAL 15 PDP_EMPTY "Dynamic address assignment in effect" VAL 33 PDP_IPV4 "IP version 4" VAL 87 PDP_IPV6 "IP version 6" VAR apn_buf "Access point name value" B VAR pdp_type "PDP type" B VAL @p_8010_142_smreg_sap - VAL_pdp_type@ COMP apn "access point name" { apn_buf [3..102] ; Access point name value } ; SMREG_CONFIGURE_REQ 0x2600 ; SMREG_PDP_ACTIVATE_REQ 0x2601 ; SMREG_PDP_ACTIVATE_CNF 0x6600 ; SMREG_PDP_ACTIVATE_IND 0x6602 ; SMREG_PDP_ACTIVATE_REJ 0x6601 ; SMREG_PDP_ACTIVATE_REJ_RES 0x2604 ; SMREG_PDP_ACTIVATE_SEC_REQ 0x2606 ; SMREG_PDP_ACTIVATE_SEC_CNF 0x6608 ; SMREG_PDP_ACTIVATE_SEC_REJ 0x6609 ; SMREG_PDP_DEACTIVATE_REQ 0x2602 ; SMREG_PDP_DEACTIVATE_CNF 0x6603 ; SMREG_PDP_DEACTIVATE_IND 0x6604 ; SMREG_PDP_MODIFY_REQ 0x2605 ; SMREG_PDP_MODIFY_CNF 0x6606 ; SMREG_PDP_MODIFY_IND 0x6605 ; SMREG_PDP_MODIFY_REJ 0x6607 PRIM SMREG_CONFIGURE_REQ 0x2600 { EXTERN @p_8010_152_ps_include - rat@ rat ; RAT EXTERN @p_8010_152_ps_include - sgsn_rel@ sgsn_rel ; network release } PRIM SMREG_PDP_ACTIVATE_REQ 0x2601 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; Network layer service access point identifier EXTERN @p_8010_137_nas_include - ti@ ti ; Transaction identifier EXTERN @p_8010_137_nas_include - comp_params@ comp_params ; Compression parameters EXTERN @p_8010_152_ps_include - qos@ qos ; Requested quality of service EXTERN @p_8010_152_ps_include - min_qos@ min_qos ; Minimum requested QoS pdp_type ; PDP type EXTERN @p_8010_137_nas_include - ip_address@ ip_address ; PDP address apn ; Access point name < () EXTERN @p_8010_137_nas_include - tft@ tft > ; Traffic Flow Template; R99 EXTERN @p_8010_152_ps_include - sdu@ sdu ; PDP config options } PRIM SMREG_PDP_ACTIVATE_CNF 0x6600 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; Network layer service access point identifier pdp_type ; PDP type EXTERN @p_8010_152_ps_include - qos@ qos ; Quality of service EXTERN @p_8010_137_nas_include - comp_params@ comp_params ; Compression parameters EXTERN @p_8010_137_nas_include - ip_address@ ip_address ; PDP address EXTERN @p_8010_152_ps_include - sdu@ sdu ; PDP config options } PRIM SMREG_PDP_ACTIVATE_IND 0x6602 { EXTERN @p_8010_137_nas_include - ti@ ti ; transaction identifier pdp_type ; PDP type EXTERN @p_8010_137_nas_include - ip_address@ ip_address ; PDP address apn ; access point name } PRIM SMREG_PDP_ACTIVATE_REJ 0x6601 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; Network layer service access point identifier EXTERN @p_8010_153_cause_include - ps_cause@ ps_cause ; Cause of rejection } PRIM SMREG_PDP_ACTIVATE_REJ_RES 0x2604 { EXTERN @p_8010_137_nas_include - ti@ ti ; transaction identifier EXTERN @p_8010_153_cause_include - ps_cause@ ps_cause ; cause of rejection } PRIM SMREG_PDP_ACTIVATE_SEC_REQ 0x2606 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; Network layer service access point identifier EXTERN @p_8010_137_nas_include - pri_nsapi@ pri_nsapi ; Primary NSAPI EXTERN @p_8010_137_nas_include - ti@ ti ; Transaction identifier EXTERN @p_8010_137_nas_include - comp_params@ comp_params ; Compression parameters EXTERN @p_8010_152_ps_include - qos@ qos ; Requested quality of service EXTERN @p_8010_152_ps_include - min_qos@ min_qos ; Minimum requested QoS < () EXTERN @p_8010_137_nas_include - tft@ tft > ; Traffic flow template } PRIM SMREG_PDP_ACTIVATE_SEC_CNF 0x6608 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; network layer service access point identifier EXTERN @p_8010_152_ps_include - qos@ qos ; quality of service } PRIM SMREG_PDP_ACTIVATE_SEC_REJ 0x6609 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; network layer service access point identifier EXTERN @p_8010_153_cause_include - ps_cause@ ps_cause ; cause of rejection } PRIM SMREG_PDP_DEACTIVATE_REQ 0x2602 { EXTERN @p_8010_137_nas_include - nsapi_set@ nsapi_set ; Set of network layer service access point identifiers EXTERN @p_8010_152_ps_include - rel_ind@ rel_ind ; Local deactivation flag } PRIM SMREG_PDP_DEACTIVATE_CNF 0x6603 { EXTERN @p_8010_137_nas_include - nsapi_set@ nsapi_set ; Set of network layer service access point identifiers } PRIM SMREG_PDP_DEACTIVATE_IND 0x6604 { EXTERN @p_8010_137_nas_include - nsapi_set@ nsapi_set ; Set of network layer service access point identifiers EXTERN @p_8010_153_cause_include - ps_cause@ ps_cause ; Deactivation cause } PRIM SMREG_PDP_MODIFY_REQ 0x2605 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; network layer service access point identifier EXTERN @p_8010_152_ps_include - qos@ qos ; requested quality of service EXTERN @p_8010_152_ps_include - min_qos@ min_qos ; minimum quality of service < () EXTERN @p_8010_137_nas_include - tft@ tft > ; traffic flow template } PRIM SMREG_PDP_MODIFY_CNF 0x6606 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; network layer service access point identifier EXTERN @p_8010_152_ps_include - qos@ qos ; quality of service } PRIM SMREG_PDP_MODIFY_IND 0x6605 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; Network layer service access point identifier EXTERN @p_8010_152_ps_include - qos@ qos ; Quality of service; Optional EXTERN @p_8010_137_nas_include - ip_address@ ip_address ; PDP address; R99, Optional } PRIM SMREG_PDP_MODIFY_REJ 0x6607 { EXTERN @p_8010_137_nas_include - nsapi@ nsapi ; network layer service access point identifier EXTERN @p_8010_153_cause_include - ps_cause@ ps_cause ; cause of rejection }