FreeCalypso > hg > fc-magnetite

view cdg3/sap/mmsms.pdf @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : mmsms.pdf
;*** Creation       : Wed Mar 11 09:58:22 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mmsms
;*** Document No.   : 6147.106.97.102
;*** Document Date  : 2002-07-19
;*** Document Status: BEING_PROCESSED
;*** Document Author: HM
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:47:08 2007"
PRAGMA 	LAST_MODIFIED 	"2002-07-19"
PRAGMA 	ID_AND_VERSION 	"6147.106.97.102"



CONST 	MAX_SDU_LEN 	1 	; maximum service data unit length



VALTAB 	VAL_ti
VAL 	0 - 6 	"ms originated transaction"
VAL 	8 - 14 	"ms originated transaction"
VAL 	7 	TI_RES_MO 	"reserved"
VAL 	15 	TI_RES_MT 	"reserved"




VAR 	cause 	"MM cause" 	S


VAR 	l_buf 	"length in bits" 	S


VAR 	o_buf 	"offset in bits" 	S


VAR 	buf 	"bit buffer" 	B


VAR 	ti 	"transaction identifier" 	B

VAL 	@p_mmsms - VAL_ti@ 	

VAR 	d1 	"dummy, not used" 	B


VAR 	d2 	"dummy, not used" 	B





COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length in bits
 	o_buf 	 ; offset in bits
 	buf 	[MAX_SDU_LEN] 	 ; bit buffer
}






; MMSMS_ESTABLISH_REQ 	0x80000009
; MMSMS_RELEASE_REQ 	0x80010009
; MMSMS_DATA_REQ 	0x80020009
; MMSMS_DATA_IND 	0x80004009
; MMSMS_ERROR_IND 	0x80014009
; MMSMS_ESTABLISH_CNF 	0x80024009
; MMSMS_ESTABLISH_IND 	0x80034009
; MMSMS_RELEASE_IND 	0x80044009
; MMSMS_UNITDATA_IND 	0x80054009



PRIM 	MMSMS_ESTABLISH_REQ 	0x80000009
{
 	ti 	 ; transaction identifier
}






PRIM 	MMSMS_RELEASE_REQ 	0x80010009
{
 	ti 	 ; transaction identifier
}






PRIM 	MMSMS_DATA_REQ 	0x80020009
{
 	d1 	 ; dummy
 	d2 	 ; dummy
 	sdu 	 ; service data unit
}






PRIM 	MMSMS_DATA_IND 	0x80004009
{
 	d1 	 ; dummy
 	d2 	 ; dummy
 	sdu 	 ; service data unit
}






PRIM 	MMSMS_ERROR_IND 	0x80014009
{
 	ti 	 ; transaction identifier
 	cause 	 ; error cause
}






PRIM 	MMSMS_ESTABLISH_CNF 	0x80024009
{
 	ti 	 ; transaction identifier
}






PRIM 	MMSMS_ESTABLISH_IND 	0x80034009
{
 	d1 	 ; dummy
 	d2 	 ; dummy
 	sdu 	 ; service data unit
}






PRIM 	MMSMS_RELEASE_IND 	0x80044009
{
 	ti 	 ; transaction identifier
 	cause 	 ; release cause
}






PRIM 	MMSMS_UNITDATA_IND 	0x80054009
{
 	d1 	 ; dummy
 	d2 	 ; dummy
 	sdu 	 ; service data unit
}