view cdg3/sap/rrrrlp.pdf @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : rrrrlp.pdf
;*** Creation       : Wed Mar 11 09:58:48 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : rrrrlp
;*** Document No.   : 0000.000.00.002
;*** Document Date  : 2002-09-10
;*** Document Status: BEING_PROCESSED
;*** Document Author: VK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:53:22 2007"
PRAGMA 	LAST_MODIFIED 	"2002-09-10"
PRAGMA 	ID_AND_VERSION 	"0000.000.00.002"



CONST 	MAX_SDU_LEN 	1 	; 
CONST 	MAX_NCELL_L1 	12 	; Max no. of NC layer 1 is able to measure
CONST 	MAX_NCELL_EOTD 	15 	; Max no. of NC reported in the Measurement Assistance Data Element (3GPP 04.31)
CONST 	MAX_NCELL_EOTD_SI 	32 	; Max no. of NC reported in the Measurement Assistance Data SI List Element (3GPP 04.31)






VAR 	dummy 	"Dummy" 	B


VAR 	l_buf 	"length in bits" 	S


VAR 	o_buf 	"offset in bits" 	S


VAR 	buf 	"bit buffer" 	B


VAR 	cr 	"Command or Response" 	B





COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length in bits
 	o_buf 	 ; offset in bits
 	buf 	[MAX_SDU_LEN] 	 ; bit buffer
}






; RRRRLP_DATA_IND 	0x80004041
; RRRRLP_DATA_REQ 	0x80000041
; RRRRLP_DATA_CNF 	0x80014041
; RRRRLP_ERROR_IND 	0x80024041



PRIM 	RRRRLP_DATA_IND 	0x80004041
{
 	cr 	 ; Command / Response
 	sdu 	 ; APDU_IND
}






PRIM 	RRRRLP_DATA_REQ 	0x80000041
{
 	cr 	 ; Command / Response
 	sdu 	 ; APDU_REQ
}






PRIM 	RRRRLP_DATA_CNF 	0x80014041
{
 	dummy 	 ; Dummy
}






PRIM 	RRRRLP_ERROR_IND 	0x80024041
{
 	dummy 	 ; Dummy
}