FreeCalypso > hg > fc-magnetite
view cdg3/sap/udp.pdf @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : udp.pdf ;*** Creation : Wed Mar 11 09:58:55 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : udp ;*** Document No. : 8444.100.00.006 ;*** Document Date : 2003-08-26 ;*** Document Status: BEING_PROCESSED ;*** Document Author: JK ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:56:22 2007" PRAGMA LAST_MODIFIED "2003-08-26" PRAGMA ID_AND_VERSION "8444.100.00.006" VALTAB VAL_port VAL 0 UDP_AUTOASSIGN_PORT "UDP must assign a free port number" VALTAB VAL_err VAL 0 UDP_BIND_NOERROR "no error" VAL 1 UDP_BIND_PORTINUSE "port already in use" VAL 2 UDP_BIND_UDPDOWN "udp is deactivated" VAR port "destination port" S VAL @p_udp - VAL_port@ VAR err "error code" B VAL @p_udp - VAL_err@ VAR dst_port "destination port" S VAR src_port "source port" S VAR err_msg "error message" B VAR src_addr "source address" L VAR dst_addr "destination address" L ; UDP_BIND_REQ 0x80000046 ; UDP_BIND_CNF 0x80004046 ; UDP_CLOSEPORT_REQ 0x80010046 ; UDP_CLOSEPORT_CNF 0x80014046 ; UDP_ERROR_IND 0x80024046 ; UDP_ERROR_RES 0x80020046 ; UDP_SHUTDOWN_IND 0x80034046 ; UDP_SHUTDOWN_RES 0x80030046 PRIM UDP_BIND_REQ 0x80000046 { port ; port } PRIM UDP_BIND_CNF 0x80004046 { port ; port err ; error code } PRIM UDP_CLOSEPORT_REQ 0x80010046 { port ; port } PRIM UDP_CLOSEPORT_CNF 0x80014046 { } PRIM UDP_ERROR_IND 0x80024046 { dst_port ; Destination port src_port ; source port err_msg ; error message src_addr ; source address dst_addr ; Destination address } PRIM UDP_ERROR_RES 0x80020046 { } PRIM UDP_SHUTDOWN_IND 0x80034046 { } PRIM UDP_SHUTDOWN_RES 0x80030046 { }