new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

#ifndef __SWCONFIG_CFG__
#define __SWCONFIG_CFG__
#define ALR 1
#define BT 0
#define DP 0
#define DWNLD 1
#define GSMLITE 0
#define L1_DYN_DSP_DWNLD 1
#define LONG_JUMP 3
#define MOVE_IN_INTERNAL_RAM 1
#define OP_WCP 0
#define PMODE 1
#define RVDATA_INTERNALRAM 0
#define SRVC 0
#define TR_BAUD_CONFIG TR_BAUD_115200
#define WCP_PROF 0
#endif /* __SWCONFIG_CFG__ */