FreeCalypso > hg > fc-magnetite
view components/l1_int @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 838eeafb0051 |
children |
line wrap: on
line source
# Building l1_int.lib SRCDIR=$SRC/cs/layer1 # *_intram.c generation helpers/makeline dep l1_cmplx_intram.c $SRCDIR/cfile/l1_cmplx.c \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd sed -n -f $SRCDIR/tools/intram.sed '$<' '>' '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline dep l1_sync_intram.c $SRCDIR/cfile/l1_sync.c \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd sed -n -f $SRCDIR/tools/intram.sed '$<' '>' '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile if [ "$GPRS" = 1 ] then helpers/makeline dep l1p_cmpl_intram.c $SRCDIR/p_cfile/l1p_cmpl.c \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd sed -n -f $SRCDIR/tools/intram.sed '$<' '>' '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline dep l1p_sync_intram.c $SRCDIR/p_cfile/l1p_sync.c \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd sed -n -f $SRCDIR/tools/intram.sed '$<' '>' '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile fi # Compilation CFLAGS="-g -me -pw2 -mt -o -mw" CPPFLAGS="-DRV_TRACE_LEVEL_WARNING=2 -DTOOL_CHOICE=0 -D_TMS470" # Includes CPPFLAGS="$CPPFLAGS -I../config" CPPFLAGS="$CPPFLAGS -I$SRC/cs/os/nucleus" CPPFLAGS="$CPPFLAGS -I.." CPPFLAGS="$CPPFLAGS -I$SRC/$GPF/frame/cust_os" CPPFLAGS="$CPPFLAGS -I$SRC/cs/system" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app/buzzer" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app/ffs" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app/sim" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_app/uart" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rv" CPPFLAGS="$CPPFLAGS -I$SRC/cs/riviera/rvt" CPPFLAGS="$CPPFLAGS -I$SRC/cs/services" CPPFLAGS="$CPPFLAGS -I$SRC/cs/services/audio" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/audio_cust0" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/audio_include" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/cust0" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/hmacs" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/include" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/p_include" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tm_include" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tm_cust0" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/dyn_dwl_include" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tpu_drivers/p_source0" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tpu_drivers/source0" CPPFLAGS="$CPPFLAGS -I$SRC/cs/layer1/tpu_drivers/source" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/abb" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/armio" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/clkm" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/conf" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dma" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/dsp_dwnld" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/inth" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/memif" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/rhea" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/security" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/spi" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/timer" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/uart" CPPFLAGS="$CPPFLAGS -I$SRC/cs/drivers/drv_core/ulpd" # Source modules cfile_plain $SRCDIR/cfile/l1_func.c cfile_plain $SRCDIR/cfile/l1_drive.c cfile_plain $SRCDIR/cfile/l1_mfmgr.c cfile_plain $SRCDIR/cfile/l1_ctl.c cfile_plain $SRCDIR/audio_cfile/l1audio_func.c cfile_plain $SRCDIR/audio_cfile/l1audio_sync.c #cfile_plain $SRCDIR/gtt_cfile/ctm/viterbi.c #cfile_plain $SRCDIR/gtt_cfile/ctm/wait_for_sync.c cfile_plain $SRCDIR/dl1/dl1_com.c cfile_plain $SRCDIR/cfile/l1_api_hisr.c if [ "$GPRS" = 1 ] then cfile_plain $SRCDIR/p_cfile/l1p_ctl.c cfile_plain $SRCDIR/p_cfile/l1p_func.c cfile_plain $SRCDIR/p_cfile/l1p_driv.c cfile_plain $SRCDIR/cmacs/macs.c fi cfile_plain l1_cmplx_intram.c cfile_plain l1_sync_intram.c if [ "$GPRS" = 1 ] then cfile_plain l1p_cmpl_intram.c cfile_plain l1p_sync_intram.c fi