new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

	.text
	.code	32
	.globl	_entry

_entry:	adr	r0, vectors
	ldmia	r0, {r1-r7}
	mov	r0, #0x800000
	stmia	r0, {r1-r7}
	ldr	pc, jumpaddr

vectors:
	.word	0x4000
	.word	0x4004
	.word	0x4008
	.word	0x400C
	.word	0x4010
	.word	0x4014
	.word	0x4018
jumpaddr:
	.word	0x4058