view helpers/build-date.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents adf7a4281fd7
children
line wrap: on
line source

/*
 * This program runs at firmware build time to produce a C file for the
 * fw build that includes the build date and time stamp.
 */

#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <strings.h>
#include <time.h>

main(argc, argv)
	char **argv;
{
	time_t now;
	struct tm *tm;

	if (argc < 2 || argc > 4) {
		fprintf(stderr,
			"usage: %s config_name target_name src_version\n",
			argv[0]);
		exit(1);
	}
	time(&now);
	tm = gmtime(&now);
	printf("const char firmware_version_str[] =\n");
	if (argc >= 3)
		printf("\"FreeCalypso Magnetite %s (%s), ", argv[1], argv[2]);
	else
		printf("\"FreeCalypso Magnetite %s, ", argv[1]);
	if (argc >= 4 && strcmp(argv[3], "unknown"))
		printf("source version %s, ", argv[3]);
	printf("build date %d-%02d-%02dT%02d:%02d:%02dZ\";\n",
		tm->tm_year+1900, tm->tm_mon+1, tm->tm_mday,
		tm->tm_hour, tm->tm_min, tm->tm_sec);
	exit(0);
}