FreeCalypso > hg > fc-magnetite
view scripts/mk-component.sh @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | 0198ac1e1a4f |
children |
line wrap: on
line source
#!/bin/sh if [ $# -lt 1 -o $# -gt 2 ] then echo "usage: $0 component-lib [flavor]" 1>&2 exit 1 fi LIBNAME="$1" if [ -n "$2" ] then recipe_file="components/$1-$2" else recipe_file="components/$1" fi if [ ! -f "$recipe_file" ] then echo "Error: $recipe_file not found" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi set -e mkdir -p $BUILD_DIR/$LIBNAME # beginning of the Makefile echo "all: $LIBNAME.lib" > $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile # shell functions to be used in the recipes make_version() { case $# in 1) echo "$1_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $1_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; 2) echo "$2_version.c:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ../../scripts/make-version.sh $1 > $2_version.c" \ >> $BUILD_DIR/$LIBNAME/Makefile ;; *) echo "Error: make_version takes 1 or 2 arguments" 1>&2 exit 1 ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile } asm_file() { if [ $# != 1 ] then echo "Error: asm_file takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .s`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/asm470 ${ASMFLAGS} "$1" '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_plain() { if [ $# != 1 ] then echo "Error: cfile_plain takes 1 argument" 1>&2 exit 1 fi objname=`basename "$1" .c`.obj helpers/makeline dep $objname "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} ${CPPFLAGS} \ "$1" >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" } cfile_str2ind() { if [ $# != 1 ] then echo "Error: cfile_str2ind takes 1 argument" 1>&2 exit 1 fi if [ "$USE_STR2IND" = 1 ] then objname=`basename "$1" .c`.obj pp_name=`echo $1 | sed -e 's/\.c$/.pp/' | tr A-Z a-z` pp__name=`echo $1 | sed -e 's/\.c$/.pp_/' | tr A-Z a-z` helpers/makeline dep $objname "$1" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) helpers/makeline cmd rm -f '$@' \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac helpers/makeline cmd ../../toolwrap/cl470 -q -po -p? -x \ ${CPPFLAGS} "$1" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/str2ind -a \ -t ../str2ind.tab -l ../str2ind.log \ -f "$pp_name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd ../../toolwrap/cl470 -q -c ${CFLAGS} \ "$pp__name" >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp_name" \ >> $BUILD_DIR/$LIBNAME/Makefile helpers/makeline cmd @rm -f "$pp__name" \ >> $BUILD_DIR/$LIBNAME/Makefile case "$objname" in *[A-Z]*) objname_lc=`echo $objname | tr A-Z a-z` helpers/makeline cmd mv $objname_lc $objname \ >> $BUILD_DIR/$LIBNAME/Makefile ;; esac echo >> $BUILD_DIR/$LIBNAME/Makefile OBJS="$OBJS $objname" else cfile_plain "$1" fi } cfile_symlink() { if [ $# != 1 ] then echo "Error: cfile_symlink takes 1 argument" 1>&2 exit 1 fi localcopy=`basename "$1"` echo "$localcopy:" >> $BUILD_DIR/$LIBNAME/Makefile echo " ln -s $1 ." >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile cfile_plain $localcopy } # invoke the recipe SRC=../../src OBJS= . "$recipe_file" # finish the Makefile helpers/makeline dep $LIBNAME.lib ${OBJS} >> $BUILD_DIR/$LIBNAME/Makefile echo ' ../../toolwrap/ar470 r $@ $^' >> $BUILD_DIR/$LIBNAME/Makefile echo >> $BUILD_DIR/$LIBNAME/Makefile echo 'clean:' >> $BUILD_DIR/$LIBNAME/Makefile echo ' rm -f *.obj *.lib *.c' >> $BUILD_DIR/$LIBNAME/Makefile