view src/aci2/aci/cmh_l2rf.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  CMH_L2RF
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the functions used by the command
|             handler for L2R.
+----------------------------------------------------------------------------- 
*/ 
#ifdef DTI

#ifndef CMH_L2RF_C
#define CMH_L2RF_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"
#include "dti.h"      /* functionality of the dti library */

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "dti_conn_mng.h"

#include "aci.h"
#include "psa.h"
#include "psa_l2r.h"
#include "psa_cc.h"
#include "cmh.h"
#include "cmh_ra.h"
#include "cmh_l2r.h"

/*==== CONSTANTS ==================================================*/

/*==== TYPES ======================================================*/

/*==== EXPORT =====================================================*/

/*==== VARIABLES ==================================================*/

/*==== FUNCTIONS ==================================================*/



/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_L2R                 |
|                                 ROUTINE : cmhL2R_GetCompDir       |
+-------------------------------------------------------------------+

  PURPOSE : get data compression direction out of p0 value 

*/

GLOBAL SHORT cmhL2R_GetCompDir ( void )
{
  switch( l2rShrdPrm.set_prm_use.p0 )
  {
  case( L2R_COMP_DIR_NONE     ): return( DR_TYP_None );
  case( L2R_COMP_DIR_TRANSMIT ): return( DR_TYP_TxOnly );
  case( L2R_COMP_DIR_RECEIVE  ): return( DR_TYP_RxOnly );
  case( L2R_COMP_DIR_BOTH     ): return( DR_TYP_Both );
  default:                       TRACE_EVENT( "UNEXP BEARER SERVICE IN CTB" );
                                 return( DR_TYP_NotPresent );
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_L2R                 |
|                                 ROUTINE : cmhL2R_SelCompDir       |
+-------------------------------------------------------------------+

  PURPOSE : select data compression direction  

*/

GLOBAL UBYTE cmhL2R_SelCompDir ( T_L2R_CMD_PRM * pCmdPrm )
{
  switch( pCmdPrm -> DSdir )
  {
  case( DS_DIR_Negotiated ): return( L2R_COMP_DIR_NONE     );
  case( DS_DIR_TxOnly     ): return( L2R_COMP_DIR_TRANSMIT );
  case( DS_DIR_RxOnly     ): return( L2R_COMP_DIR_RECEIVE  );
  case( DS_DIR_Both       ): return( L2R_COMP_DIR_BOTH     );
  default:                   TRACE_EVENT( "UNEXP BEARER SERVICE IN CTB" );
                             return( -1 );
  }
}

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : CMH_L2R                 |
|                                 ROUTINE : cmhL2R_SelChnRate       |
+-------------------------------------------------------------------+

  PURPOSE : select channel rate  

*/

GLOBAL UBYTE cmhL2R_SelChnRate ( void )
{
  switch( ccShrdPrm.chType )
  {
    case( CH_TCH_F ):
      switch( ccShrdPrm.chMod )
      {
      case( CHM_DATA_14_4  ): return( L2R_FULLRATE_14400 ); 
      case( CHM_DATA_9_6   ): return( L2R_FULLRATE_9600 );
      case( CHM_DATA_4_8   ): return( L2R_FULLRATE_4800 );
      case( CHM_DATA_2_4   ): 
      default:                TRACE_EVENT( "UNEXP CHN MODE IN CTB" );
                              return( -1 );
      }

    case( CH_TCH_H ):
      switch( ccShrdPrm.chMod )
      {
      case( CHM_DATA_4_8   ): return( L2R_HALFRATE_4800 );
      case( CHM_DATA_14_4  ):
      case( CHM_DATA_9_6   ):
      case( CHM_DATA_2_4   ): 
      default:                TRACE_EVENT( "UNEXP CHN MODE IN CTB" );
                              return( -1 );
      }

    default:                  TRACE_EVENT( "UNEXP CHN TYPE IN CTB" );
                              return( -1 );
  }
}

#endif /* DTI */
/*==== EOF ========================================================*/