view src/aci2/aci/psa_mmis.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  PSA_MMI
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This module defines the signalling functions of the 
|             protocol stack adapter for the man machine interface.
+----------------------------------------------------------------------------- 
*/ 

#ifndef PSA_MMIS_C
#define PSA_MMIS_C
#endif

#include "aci_all.h"

/*==== INCLUDES ===================================================*/
#include "aci_cmh.h"
#include "ati_cmd.h"
#include "aci_cmd.h"

#ifdef FAX_AND_DATA
#include "aci_fd.h"
#endif    /* of #ifdef FAX_AND_DATA */

#include "aci.h"
#include "psa.h"
#include "psa_sms.h"
#include "psa_mmi.h"
#include "cmh.h"
#include "cmh_sms.h"
#include "cmh_mmi.h"

/*==== CONSTANTS ==================================================*/
#ifdef FF_HOMEZONE
#define CBHZ_ON_MSG_ID  0xDD
#define CBHZ_OFF_MSG_ID 0xFFFF
#endif /* HOMEZONE */

/*==== TYPES ======================================================*/


/*==== EXPORT =====================================================*/


/*==== VARIABLES ==================================================*/


/*==== FUNCTIONS ==================================================*/

/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Cbch             |
+-------------------------------------------------------------------+

  PURPOSE : cell broadcast channel request

*/

GLOBAL SHORT psaMMI_Cbch ( void )
{
  TRACE_FUNCTION ("psaMMI_Cbch()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
    
    return( -1 );

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */
  if (smsShrdPrm.cbmPrm.cbmHndl NEQ BM0)   /* only if NMI for CBM is set*/
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    /* fill in primitive parameter: CBCH request */
    memcpy ( ( CHAR * ) mmi_cbch_req -> msg_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.msgId,
             sizeof ( mmi_cbch_req -> msg_id ) );

    memcpy ( ( CHAR * ) mmi_cbch_req -> dcs_id,
             ( CHAR * ) smsShrdPrm.cbmPrm.dcsId,
             sizeof ( mmi_cbch_req -> dcs_id ) );

    mmi_cbch_req -> modus = smsShrdPrm.cbmPrm.cbmMode;

    PSENDX (PL, mmi_cbch_req);
  }
  else
  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
    mmi_cbch_req -> modus = MMI_CBCH_STOP;

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}

#ifdef FF_HOMEZONE
/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_homezone_req     |
+-------------------------------------------------------------------+

  PURPOSE : homezone request

*/

GLOBAL SHORT psaMMI_homezone_req( void )
{
  TRACE_FUNCTION ("psaMMI_homezone_req()");

/*
 *-------------------------------------------------------------------
 * check owner id
 *-------------------------------------------------------------------
 */  
  if(!psa_IsVldOwnId(smsShrdPrm.cbmPrm.cbchOwner)) 
  {    
    return( -1 );
  }

/*
 *-------------------------------------------------------------------
 * create and send primitive for CBCH request
 *-------------------------------------------------------------------
 */

  {
    PALLOC (mmi_cbch_req, MMI_CBCH_REQ);

    memset (mmi_cbch_req, NOT_PRESENT_8BIT, sizeof(T_MMI_CBCH_REQ));
  
    /* fill in primitive parameter: CBCH request */
    mmi_cbch_req->modus     = CBCH_HOMEZONE;

    if ( smsShrdPrm.cbmPrm.hzMode EQ CBHZ_MOD_Active )
    {
      mmi_cbch_req->msg_id[0] = CBHZ_ON_MSG_ID;
    }
    else
    {
      mmi_cbch_req->msg_id[0] = CBHZ_OFF_MSG_ID;
    }

    mmi_cbch_req->dcs_id[0] = smsShrdPrm.cbmPrm.hzDcs;
    mmi_cbch_req->dcs_id[1] = smsShrdPrm.cbmPrm.hzTimeout;

    TRACE_EVENT_P2("MMI_CBCH_REQ: modus %d, msg_id %d", 
                    mmi_cbch_req->modus, mmi_cbch_req->msg_id[0]);

    PSENDX (PL, mmi_cbch_req);
  }
  return 0;
}
#endif /* FF_HOMEZONE */


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS (6147)         MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_Display          |
+-------------------------------------------------------------------+

  PURPOSE : set the parameters for display request

*/

GLOBAL SHORT psaMMI_Display ( void )
{

  TRACE_FUNCTION ("psaMMI_Display()");

/*
 *-------------------------------------------------------------------
 * create and send primitive for display request 
 *-------------------------------------------------------------------
 */
  {
    PSENDX (PL, mmiShrdPrm.dspRq);
  }

  return 0;
}


/*
+-------------------------------------------------------------------+
| PROJECT : GSM-PS                MODULE  : PSA_MMIS                |
|                                 ROUTINE : psaMMI_ConfigPrim       |
+-------------------------------------------------------------------+

  PURPOSE : send a config message to a entity

*/
#define CONFIG_STR 0x0

typedef struct
{
  char config_str[80];
} T_CONFIG_STR;


GLOBAL void psaMMI_ConfigPrim (T_HANDLE receiver_handle, 
                               char *config_msg)
{
  PALLOC (cfg_str, CONFIG_STR);

  D2P(cfg_str)->opc |= SYS_MASK;
  strcpy (cfg_str->config_str, config_msg);

  PSEND (receiver_handle, cfg_str);
}


/*==== EOF ========================================================*/