view src/aci2/aci/psa_pktio.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+------------------------------------------------------------------------------
|  File:       psa_pktio.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG.
+------------------------------------------------------------------------------
| Purpose:     Definitions for the protocol stack adapter 
|              packet i/o managment (MNPKTIO).
+------------------------------------------------------------------------------
*/

#ifdef GPRS
#ifdef FF_PKTIO
#ifndef PSA_PKTIO_H
#define PSA_PKTIO_H



/*==== CONSTANTS ==================================================*/

/*==== TYPES ======================================================*/
typedef T_dio_dcb T_ACI_PKTIO_CAP; /* structure for capabilities of DIO */
typedef struct
{
    UBYTE device_no;
    T_ACI_PKTIO_CAP pktio_cap;
} T_ACI_PKTIO;
/* only for test purposes */
typedef enum{
   PKT_CONNECT_DTI = 0,
   PKT_DISCONNECT_DTI
}T_DTI_MNG_PKT_MODE;




/*==== PROTOTYPES =================================================*/

EXTERN void psaPKT_ConnectRej ( UBYTE device_no);
EXTERN void psaPKT_ConnectRes ( UBYTE device_no, T_ACI_PKTIO_CAP * pktio_cap);
EXTERN void psaPKT_DTICloseReq ( UBYTE device_no);
EXTERN void psaPKT_DTIOpenReq ( UBYTE device_no, const char * peer_name,
                                ULONG link_id, UBYTE dti_direction);
EXTERN void psaPKT_ModifyReq ( UBYTE device_no, T_ACI_PKTIO_CAP * pktio_cap);

EXTERN  void psaPKT_Dti_Req ( ULONG  link_id, UBYTE  peer, T_DTI_MNG_PKT_MODE con_mode);

/*==== EXPORT =====================================================*/


#endif /* PSA_PKTIO_H */
#endif /* FF_PKTIO */
#endif  /* GPRS */
/*==== EOF =======================================================*/