FreeCalypso > hg > fc-magnetite

view src/aci2/mfw/mfw.mak @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

#
#	Setting Directory for Layer4 Objects
#
#OBJ := $(L23_OBJ_DIR)/mfw
TARID := mfw$(NSRVC)$(NTK)$(NWAP)$(NBT)$(NCOMPTRC)$(NUNIC)$(NEM)
OBJ := $(CONDAT_DIR)/obj/obj_$(TARID)

#containing compileroptions specific for this library
SPECOPT = $(FDOPT) $(MMIOPT) $(BTOPT) $(CPHSOPT)

# must not be empty. set to "-D" for no local flags.
#MY_OPTIONS = -D
MY_OPTIONS = -DUMTS -DTARGET -D_RVF -DFF_SAT_E -DFF_2TO1_PS

#INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCSMI) -I$(SRCKSD) $(INCBTI)
INCLAYER4 = -I$(SRCMFW)  -I$(SRCACI)  -I$(SRCACIDTI)  -I$(SRCACIEXT)  -I$(SRCSMI) -I$(SRCKSD) $(INCBTI)

SRCOBJ = $(MFWOBJ)
SRCATB = $(CONDAT_DIR)/ms/src/atb
# New editor. 1 -> Compile. 0 -> Don't compile, compile old editor.
NEWED = 1

#
# Sim apllication setting
#	
ifeq ($(TK),1)
COPT1 += -dSIM_TOOLKIT
else
COPT1 += -uSIM_TOOLKIT
endif

#
# Support for light version
#
#JVJ-SPR-1298. Provisional until a new option in the .inf file is inserted.

ifeq ($(SRVC),0)
COPT1 += -dMMI_LITE
else
COPT1 += -uMMI_LITE
endif



#SMS PDU mode settings	
ifeq ($(PDU),1)
COPT1 += -dSMS_PDU_SUPPORT
else
COPT1 += -uSMS_PDU_SUPPORT
endif

#
# Support for UNICODE
#	
ifeq ($(UNIC),1)
COPT1 += -dNO_ASCIIZ
endif

# Support for MMI gprs
ifeq ($(PMODE),2)
COPT1 += -dMMI_GPRS_ENABLED
else
COPT1 += -uMMI_GPRS_ENABLED
endif

#
# Internal Phonebook
# Currently always on
#
#ifeq ($(INTPB),1)
COPT1 += -dINT_PHONEBOOK
#else
#COPT1 += -uINT_PHONEBOOK
#endif

#
# New editor (SPR#1428 - SH)
#
ifeq ($(NEWED),1)
COPT1 += -dNEW_EDITOR
else
COPY1 += -uNEW_EDITOR
endif

#
# Begin MFW
#
ifeq ($(TK),0)
MFWOBJ := $(OBJ)/ti1_key.$(OBJ_TAIL) \
	$(OBJ)/ti1_tmr.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mfw.$(OBJ_TAIL) \
	  $(OBJ)/mfw_win.$(OBJ_TAIL) \
	  $(OBJ)/mfw_kbd.$(OBJ_TAIL) \
	  $(OBJ)/mfw_tim.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mnu.$(OBJ_TAIL) \
	  $(OBJ)/mfw_icn.$(OBJ_TAIL)	$(OBJ)/mfw_ext.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cm.$(OBJ_TAIL)	$(OBJ)/mfw_ss.$(OBJ_TAIL) \
	  $(OBJ)/mfw_nm.$(OBJ_TAIL)	$(OBJ)/mfw_nma.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sim.$(OBJ_TAIL)	$(OBJ)/mfw_sima.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sms.$(OBJ_TAIL)	$(OBJ)/mfw_phb.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mme.$(OBJ_TAIL)	$(OBJ)/mfw_cb.$(OBJ_TAIL)  \
	  $(OBJ)/mfw_acie.$(OBJ_TAIL)	$(OBJ)/mfw_lng.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cnvt.$(OBJ_TAIL)	$(OBJ)/mfw_cphs.$(OBJ_TAIL) \
	  $(OBJ)/mfw_str.$(OBJ_TAIL)	$(OBJ)/mfw_ffs.$(OBJ_TAIL) \
	  $(OBJ)/CPHS_mod.$(OBJ_TAIL) $(OBJ)/mfw_band.$(OBJ_TAIL) \
	  $(OBJ)/mfw_utils.$(OBJ_TAIL)	$(OBJ)/mfw_aud.$(OBJ_TAIL) \
	  $(OBJ)/mfw_td.$(OBJ_TAIL) $(OBJ)/mfw_cam.$(OBJ_TAIL)
else
MFWOBJ := $(OBJ)/ti1_key.$(OBJ_TAIL) \
		$(OBJ)/ti1_tmr.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mfw.$(OBJ_TAIL) \
	  $(OBJ)/mfw_win.$(OBJ_TAIL) \
	  $(OBJ)/mfw_kbd.$(OBJ_TAIL) \
	  $(OBJ)/mfw_tim.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mnu.$(OBJ_TAIL) \
	  $(OBJ)/mfw_icn.$(OBJ_TAIL) \
	  $(OBJ)/mfw_ext.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cm.$(OBJ_TAIL) \
	  $(OBJ)/mfw_ss.$(OBJ_TAIL) \
	  $(OBJ)/mfw_nm.$(OBJ_TAIL) \
	  $(OBJ)/mfw_nma.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sim.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sima.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sms.$(OBJ_TAIL) \
	  $(OBJ)/mfw_phb.$(OBJ_TAIL) \
	  $(OBJ)/mfw_mme.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cb.$(OBJ_TAIL)  \
	  $(OBJ)/mfw_acie.$(OBJ_TAIL) \
	  $(OBJ)/mfw_sat.$(OBJ_TAIL) \
	  $(OBJ)/mfw_lng.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cnvt.$(OBJ_TAIL) \
	  $(OBJ)/mfw_cphs.$(OBJ_TAIL) \
	  $(OBJ)/mfw_str.$(OBJ_TAIL) \
	  $(OBJ)/mfw_ffs.$(OBJ_TAIL) \
	  $(OBJ)/mfw_band.$(OBJ_TAIL) \
	  $(OBJ)/mfw_utils.$(OBJ_TAIL) \
	  $(OBJ)/mfw_aud.$(OBJ_TAIL) \
	  $(OBJ)/mfw_td.$(OBJ_TAIL) \
#	  $(OBJ)/mfw_mp3test.$(OBJ_TAIL) \
#      $(OBJ)/mfw_cam.$(OBJ_TAIL)

endif

# SH - Only compile mfw_edt if new editor is not defined
ifeq ($(NEWED),0)
MFWOBJ += $(OBJ)/mfw_edt.$(OBJ_TAIL)
endif

ifeq ($(BT),2)
MFWOBJ += $(OBJ)/mfw_bt.$(OBJ_TAIL)    $(OBJ)/mfw_bta.$(OBJ_TAIL)
endif

ifeq ($(EM),1)
MFWOBJ +=	$(OBJ)/mfw_em.$(OBJ_TAIL) #SPR1209
endif
#
# Add necessary GPRS modules when GPRS is requested
#
ifeq ($(PMODE),2)
MFWOBJ += $(OBJ)/mfw_gprs.$(OBJ_TAIL)
endif


#
# Common files for ATB
#
ifeq ($(NEWED),1)
MFWATBOBJ :=$(OBJ)/ATBCommon.$(OBJ_TAIL) \
	$(OBJ)/ATBDisplay.$(OBJ_TAIL)
endif


#
# New Editor
#
ifeq ($(NEWED),1)
MFWATBOBJ += $(OBJ)/ATBEditor.$(OBJ_TAIL)
endif

#
# Internal phonebook
# Currently always on
#
#ifeq ($(INTPB),1)
MFWATBOBJ += $(OBJ)/ATBPb.$(OBJ_TAIL) \
	$(OBJ)/ATBPbGI.$(OBJ_TAIL) \
	$(OBJ)/ATBPbFS.$(OBJ_TAIL)
#endif

#
# End MFW
#


#
# Creating mfw.lib
#


$(TOP_DIR)/$(MFW_LIB) : $(OBJ) $(SRCOBJ) $(MFWATBOBJ)
	-$(PERL) $(CONDAT_DIR)/int/bin/make_ver.pl
	$(AR) r $(TOP_DIR)/$(MFW_LIB) $(SRCOBJ) $(MFWATBOBJ) ver.$(OBJ_TAIL)

$(OBJ): 
	mkdir $(subst /,$(SLASH),$(OBJ))
	
clean: 
	$(REMOVE) $(subst /,$(SLASH),$(OBJ))


$(MFWOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCMFW)/%.c
	echo -D$(NCONFIG) >  cmd
	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo $(SPECOPT) >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(SRCATB) >> cmd
	echo $(INCLAYER4) >> cmd
	echo -I$(SRCACIEXT) >> cmd
	echo -I$(SRCACIDTI) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd

$(MFWATBOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCATB)/%.c
	echo -D$(NCONFIG) >  cmd
	echo $(MY_OPTIONS) >> cmd
	echo -D$(NTRACE) >> cmd
	echo -D$(NWARN) >> cmd
	echo $(SPECOPT) >> cmd
	echo $(COPT) >> cmd
	echo $(COPT1) >> cmd
	echo $(COTAR) >> cmd
	echo $(FDOPT) >> cmd
	echo $(INCDRV1) >> cmd
	echo -I$(ICOM) >> cmd
	echo $(INCDRV2) >> cmd
	echo -I$(ICDG) >> cmd
	echo -I$(SRCATB) >> cmd
	echo $(INCLAYER4) >> cmd
	echo -fr$(OBJ) >> cmd
	$(CC_PRE) $^ -@cmd
	$(CC_INT) $(addsuffix .pp,$(basename $^))
	$(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd