FreeCalypso > hg > fc-magnetite
view src/aci2/mfw/mfw_aud.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------+ | PROJECT: MMI-Framework (8417) $Workfile:: mfw_aud.h $| | $Author:: NDH $Revision:: 1 $| | CREATED: 04.02.03 $Modtime:: 10.04.00 14:58 $| | STATE : code | +--------------------------------------------------------------------+ MODULE : MFW_AUD PURPOSE : This module contains the definitions for the Audio Riveria Interface. */ /* ** Voice Memo Functions Prototypes */ SHORT mfw_aud_vm_delete_file(void); SHORT mfw_aud_vm_start_playback(void (*callback_fn)(void *)); SHORT mfw_aud_vm_stop_playback(void (*callback_fn)(void *)); SHORT mfw_aud_vm_start_record(UBYTE max_duration, void (*callback_fn)(void *)); SHORT mfw_aud_vm_stop_record(void (*callback_fn)(void *)); UBYTE mfw_aud_vm_get_duration(void); void mfw_aud_vm_set_duration(UBYTE duration); /* ** Layer1 Audio interface functions */ void mfw_aud_l1_enable_vocoder ( void ); void mfw_aud_l1_disable_vocoder ( void ); /* ** Voice Memo Return Values */ #define MFW_AUD_VM_OK (0) #define MFW_AUD_VM_RIVIERA_FAILED (-1) #define MFW_AUD_VM_MEM_FULL (-2) #define MFW_AUD_VM_MEM_EMPTY (-3)