view src/aci2/mfw/mfw_tim.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+--------------------------------------------------------------------+
| PROJECT: MMI-Framework (8417)         $Workfile:: mfw_tim.h       $|
| $Author:: Es  $ CONDAT GmbH           $Revision:: 8               $|
| CREATED: 21.09.98                     $Modtime:: 2.03.00 11:50    $|
| STATE  : code                                                      |
+--------------------------------------------------------------------+

   MODULE  : MFW_TIM

   PURPOSE : Timer types & constants

   EXPORT  :

   TO DO   :

   $History:: mfw_tim.h                                             $
 * 
 * *****************  Version 8  *****************
 * User: Es           Date: 3.03.00    Time: 12:10
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * timStart(), timSignal() etc.: safer handling of simultaneous
 * timeouts; additional chain in timer control block.
 *
 * *****************  Version 7  *****************
 * User: Nm           Date: 18.02.00   Time: 12:34
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * change the name timSetup to
 * timSetTime
 *
 * *****************  Version 6  *****************
 * User: Nm           Date: 18.02.00   Time: 12:21
 * Updated in $/GSM/Condat/MS/SRC/MFW
 * add timSetup()
 *
 * *****************  Version 5  *****************
 * User: Es           Date: 14.06.99   Time: 12:14
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 4  *****************
 * User: Es           Date: 17.02.99   Time: 19:11
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 3  *****************
 * User: Es           Date: 14.01.99   Time: 17:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
 *
 * *****************  Version 2  *****************
 * User: Es           Date: 23.12.98   Time: 16:19
 * Updated in $/GSM/DEV/MS/SRC/MFW
*/

#ifndef _DEF_MFW_TIM_H_
#define _DEF_MFW_TIM_H_

typedef struct MfwTimTag                /* TIMER CONTROL BLOCK      */
{
    S32 time;                           /* timeout time             */
    S32 left;                           /* time left before timeout */
    MfwCb handler;                      /* event handler            */
    struct MfwTimTag *next;             /* next in active chain     */
    struct MfwTimTag *next2;            /* next in timeout chain    */
    // PATCH LE 06.06.00
    // add pointer to MFW header element
    MfwHdr * mfwHeader;                /* Associated header.  SPR#1597 - SH - Change mfw_header to mfwHeader */
    // END PATCH LE 06.06.00
} MfwTim;

                                        /* PROTOTYPES               */
MfwRes timInit (void);
MfwRes timExit (void);
MfwHnd timCreate (MfwHnd w, S32 t, MfwCb f);
MfwRes timDelete (MfwHnd h);
MfwRes timStart (MfwHnd tim);
MfwRes timStop (MfwHnd tim);
MfwRes timSetTime (MfwHnd tim, S32 t);
S32 timTime (MfwHnd h);
void timSignal (void);

#endif