FreeCalypso > hg > fc-magnetite
view src/condat3/com/include/cl_list.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 04 Jan 2020 19:27:41 +0000 |
parents | c8bd5a927942 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : COMLIB | Modul : RR/PL +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Definitions of global types used by List Processing functions | and the prototypes of those functions: RR/PL layer. +----------------------------------------------------------------------------- */ #ifndef CL_LIST_H #define CL_LIST_H /*==== CONST ================================================================*/ #define BITOFFSET_LIST 1024 #define MAX_BYTES_900 16 #define MAX_BYTES_EGSM 23 #define MAX_BYTES_1800 47 #define MAX_BYTES_1900 38 #define MAX_BYTES_DUAL 63 #define MAX_BYTES_850 16 #define MAX_BYTES_DUAL_EGSM 70 #define MAX_BYTES_DUAL_US 54 #define SET_CHANNEL_BIT 0 #define RESET_CHANNEL_BIT 1 #define GET_CHANNEL_BIT 2 #define CHECK_CHANNEL 3 #define T_LIST_MAX_SIZE 128 /* 1024/8 = 128 */ typedef struct { UBYTE channels [T_LIST_MAX_SIZE]; } T_LIST; /*==== MACROS ================================================================*/ #define srv_set_channel(list,ch) scr_channel_bit(list,ch,SET_CHANNEL_BIT) #define srv_unset_channel(list,ch) scr_channel_bit(list,ch,RESET_CHANNEL_BIT) #define srv_get_channel(list,ch) scr_channel_bit(list,ch,GET_CHANNEL_BIT) /*==== VARS =================================================================*/ /*==== TYPES =================================================================*/ /*==== FUNCTIONS ============================================================*/ EXTERN UBYTE scr_channel_bit (T_LIST *list, int channel, int mode); EXTERN int srv_create_list (T_LIST *list, USHORT *channel_array, USHORT size, UBYTE zero_at_start, USHORT start_index); EXTERN void srv_clear_list (T_LIST *list); EXTERN void srv_copy_list (T_LIST *target_list, T_LIST *source_list, UBYTE size); EXTERN UBYTE srv_compare_list (T_LIST *list1, T_LIST *list2); EXTERN void srv_merge_list (T_LIST *target_list, T_LIST *list); EXTERN void srv_unmask_list (T_LIST *target,T_LIST *source); EXTERN void srv_trace_freq_in_list (T_LIST *list); EXTERN U8 srv_get_region_from_std (U8 std); EXTERN U16 srv_count_list (T_LIST *list); extern BOOL srv_is_list_set (T_LIST *list); #endif /* #ifndef CL_LIST_H */