view src/condat3/com/include/cl_ribu.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c8bd5a927942
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  COMLIB
|  Modul   :  cl_ribu
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Definitions of global types used by common library functions
|             and the prototypes of those functions.
+-----------------------------------------------------------------------------
*/
/*
 *  Version 1.0
 */

/**********************************************************************************/

#ifndef CL_RIBU_H
#define CL_RIBU_H

/**********************************************************************************/

typedef struct
{
  U8 ri;        /* ring buffer read index */
  U8 wi;        /* ring buffer write index */
  U8 depth;     /* ring buffer depth */
  U8 filled;    /* ring buffer filled flag */
} T_RIBU;

typedef struct
{
  U8 type;
  U8 status;
  U8 len;   /* buffer length */
  U8 *buf;  /* buffer start address */
} T_FD;     /* frame descriptor */

typedef struct
{
  T_RIBU idx;
  T_FD **pFDv;  /* frame descriptor vector */
} T_RIBU_FD;

/**********************************************************************************/

EXTERN void cl_ribu_create(T_RIBU_FD **ribu, const U8 buflen, const U8 depth);
EXTERN void cl_ribu_release(T_RIBU_FD **ribu);

EXTERN void cl_ribu_put(const T_FD fd, T_RIBU_FD *ribu);
EXTERN T_FD *cl_ribu_get(T_RIBU_FD *ribu);
EXTERN T_FD *cl_ribu_get_new_frame_desc(T_RIBU_FD *ribu);

EXTERN void cl_ribu_init(T_RIBU *ribu, const U8 depth);
EXTERN U8   cl_ribu_read_index(T_RIBU *ribu);
EXTERN U8   cl_ribu_write_index(T_RIBU *ribu);
EXTERN BOOL cl_ribu_data_avail(const T_RIBU_FD *ribu);

EXTERN  void cl_set_frame_desc(T_FRAME_DESC *frame_desc, U8 *A0, U16 L0, U8 *A1, U16 L1);
EXTERN  void cl_set_frame_desc_0(T_FRAME_DESC *frame_desc, U8 *A0, U16 L0);

#endif /* CL_RIBU_H */