view src/condat3/frame/config/gprsdrv.c @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents c8bd5a927942
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  
|  Modul   :  
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Driver Table for GPRS
+----------------------------------------------------------------------------- 
*/ 

#ifndef __GPRSDRV_C__
#define __GPRSDRV_C__
#endif

#ifndef _TARGET_
#define NEW_ENTITY
#endif

#ifdef _TARGET_
  #ifdef FF_TRACE_OVER_MTST
    #define MTST_TRACE
  #else
    #define TI_TRACE
  #endif
#endif

#include "gdi.h"
#include "vsi.h"
#include "pei.h"
#include "gprsconst.h"
#include "frm_defs.h"
#include "frm_types.h"

/*==== TYPES ======================================================*/


/*==== CONSTANTS ==================================================*/

#if defined _TARGET_ && !defined PCON
 #define TR_RCV_BUF_SIZE    1024
#else
 #define TR_RCV_BUF_SIZE    1024
#endif

#define TR_MAX_IND         (TR_RCV_BUF_SIZE-1)

/*==== EXTERNALS ==================================================*/

#ifdef TI_TRACE
extern USHORT TIF_Init   ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                           T_DRV_EXPORT const **DrvInfo );
extern USHORT TR_Init    ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                           T_DRV_EXPORT const **DrvInfo );
extern USHORT TITRC_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                           T_DRV_EXPORT const **DrvInfo );
#else
extern USHORT TIF_Init     ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                             T_DRV_EXPORT const **DrvInfo );
extern USHORT TR_Init      ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                             T_DRV_EXPORT const **DrvInfo );
extern USHORT SER_Init     ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                             T_DRV_EXPORT const **DrvInfo );
#endif
extern USHORT mux_Init ( USHORT DrvHandle, T_DRV_CB_FUNC CallbackFunc,
                         T_DRV_EXPORT const **DrvInfo );
/*==== VARIABLES ==================================================*/

ULONG TR_RcvBufferSize = TR_RCV_BUF_SIZE;
ULONG TR_MaxInd = TR_MAX_IND;

const T_DRV_LIST_ENTRY DrvList[] =
{
  { NULL,   NULL,         NULL,  NULL },
#ifdef TI_TRACE
  #if defined _TARGET_
    { "TIF",  TIF_Init,     "RCV", NULL },
  #else
    { "TIF",  TIF_Init,     "RCV", "ENABLE_PCON" },
  #endif
  { "TR",   TR_Init,      NULL,  NULL },
  { "TITRC",TITRC_Init,   NULL,  "" },
#else 
  #ifdef MTST_TRACE 
  #if defined _TARGET_
    { "TIF",  TIF_Init,     "RCV", NULL },
  #else
    { "TIF",  TIF_Init,     "RCV", "ENABLE_PCON" },
  #endif
  { "TR",   TR_Init,      NULL,  NULL },
  { "MUX",  mux_Init,     NULL,  "" },
  #else
  #if defined _TARGET_
    { "TIF",  TIF_Init,     "RCV", NULL },
  #else
    { "TIF",  TIF_Init,     "RCV", "ENABLE_PCON" },
  #endif
  { "TR",   TR_Init,      NULL,  NULL },
  { "SER",  SER_Init,     NULL,  ""   },
  #endif
#endif
  { NULL,   NULL,         NULL,  NULL }
};

int vsi_o_trace (char *caller, ULONG tclass, char *text,...)
{
  return 0;
}