FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/abb/abb_inth.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/**********************************************************************************/
/*            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION              */
/*                                                                                */
/*   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only      */
/*   Unauthorized reproduction and/or distribution is strictly prohibited.  This  */
/*   product  is  protected  under  copyright  law  and  trade  secret law as an  */
/*   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All  */
/*   rights reserved.                                                             */
/*                                                                                */
/*                                                                                */
/*   Filename          : abb_inth.h                                               */
/*                                                                                */
/*   Description       : Functions to manage the ABB device interrupt.            */
/*                       The Serial Port Interface is used to connect the TI  	  */
/*					          	 Analog BaseBand (ABB).				    			      	          */
/*						           It is assumed that the ABB is connected as the SPI       */																				  
/*                       device 0, and ABB interrupt is mapped as external IT.    */																				  
/*														                                      						  */
/*   Author            : Pascal PUEL                                              */
/*                                                                                */
/*   Version number   : 1.0                                                       */
/*                                                                                */
/*   Date and time    : Jan 2003                                                  */
/*                                                                                */
/*   Previous delta   : Creation                                                  */
/*                                                                                */
/**********************************************************************************/
/*                                                                                */
/*   17/12/03                                                                     */
/*   The original abb_inth.h has been splitted between the actual abb_inth.h      */
/*   located in drv_apps directory and abb_inth_core.h located in drv_core        */
/*   directory.                                                                   */
/*   abb_core_inth.h must be included in abb_inth.h.                              */
/*                                                                                */
/**********************************************************************************/

#ifndef __ABB_INTH_H__
#define __ABB_INTH_H__

  #include "main/sys_types.h"
  #include "abb/abb_core_inth.h" 

  #ifndef _WINDOWS

    #include "l1sw.cfg"
    #include "chipset.cfg"
  
    /****************************************************************/
    /* Power ON/OFF key definition.                                 */
    /****************************************************************/
    // If <ON/OFF> key is pressed more than 20 TDMAs, it's a Hook-ON
    #define SHORT_OFF_KEY_PRESSED  (20)
  
    // If <ON/OFF> key is pressed more than 160 TDMAs, it's a Hook-ON AND then Power-OFF
    #define OFF_LOOP_COUNT   (8)
    #define LONG_OFF_KEY_PRESSED   (OFF_LOOP_COUNT * SHORT_OFF_KEY_PRESSED)
  
  #endif   // _WINDOWS
  
  // PROTOTYPES
  void spi_abb_read_int_reg_callback(SYS_UWORD16 *read_value);

#endif  // __ABB_INTH_H__