new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.

/*
 * Flash File System (ffs)
 *
 * WCP PCM Compatibility Support
 */

#ifndef _FFS_PCM_H
#define _FFS_PCM_H

/**** FFS CONFIG (used for Perseus1) ****/
#define FFS_BASE_ADDRESS    0x00808000
#define IMAGE_SIZE          0x00004000

effs_t          ffs_InitRFCap   (                   );
effs_t          ffs_SetBand     (unsigned char* band);
unsigned char   ffs_GetBand     (                   );
void            ffs_restore     (                   );
void            ffs_backup      (                   );

#endif // _FFS_PCM_H