view src/cs/drivers/drv_app/lcc/lcc_api.h @ 632:d968a3216ba0

new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR MMI Interface
 *
 * $Id: pwr_api.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/

#ifndef __LCC_API_H__
#define __LCC_API_H__

#include "rv/rv_general.h"

#ifndef BASIC_TYPES
#define BASIC_TYPES
typedef signed   char  int8;
typedef unsigned char  uint8;
typedef signed   short int16;
typedef unsigned short uint16;
typedef signed   int   int32;
typedef unsigned int   uint32;
#endif


// INFO Indication mail SENT to the MMI
struct mmi_info_ind_s {
     T_RV_HDR header;
     int      Vbat;  // Battery Voltage
     int      Tbat;  // Battery Temperature
     int      Cbat;  // Battery Capacity
     int      cause; // Reason for the charge fail
};

typedef struct mmi_info_ind_s  T_PWR_MMI_INFO_IND_EVENT;

// Corresponds to /mmi/pwr/bsie.cfg
typedef struct
{
    uint16    repetition;     // The repetition interval for sending MMI info events
} T_PWR_MMI_CFG_BLOCK;


// Events send from the PWR module
// See RIV461
typedef enum PWR_MMI_MESSAGES {
    MMI_CHG_PLUG_IND     = 1,
    MMI_CHG_UNPLUG_IND   = 2,
    MMI_CHG_START_IND    = 3,
    MMI_CHG_STOP_IND     = 4,
    MMI_CHG_UNKNOWN_IND  = 5,
    MMI_BAT_UNKNOWN_IND  = 6,
    MMI_CHG_FAILED_IND   = 7,
    MMI_BAT_SUPERVISION_INFO_IND = 10
};

// Only one instance (e.g. the MMI) can register
void pwr_register (T_RV_RETURN_PATH *return_path, void *ptr);

#endif