FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/lcc/lcc_handle_message.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * PWR Message Processing * * $Id: pwr_handle_message.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __LCC_HANDLE_MESSAGE_H_ #define __LCC_HANDLE_MESSAGE_H_ #include "lcc/lcc.h" /****************************************************************************** * Function prototypes ******************************************************************************/ T_RVM_RETURN pwr_task_init(void); T_RV_RET process_pwr_tm_read_request (T_PWR_REQ *request); T_RV_RET process_pwr_tm_write_request (T_PWR_REQ *request); T_RV_RET process_spi_adc_indication (T_PWR_REQ *request); void pwr_send_msg(uint32 msg_id ,T_RVF_ADDR_ID src_addr_id, T_RVF_ADDR_ID dest_addr_id); void pwr_modulate_on(void); void pwr_modulate_off(void); void start_q401_charge(void); void stop_q401_charge(void); void build_name(const char *ch_pre, char *cfg_id , UINT8 index, const char * ch_post, char * name); void cv_charging_house_keeping(void); void end_charging_house_keeping(void); #endif