FreeCalypso > hg > fc-magnetite
view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 632:d968a3216ba0
new tangomdm build target
TCS211/Magnetite built for target leonardo runs just fine on the Tango-based
Caramel board, but a more proper tangomdm build target is preferable in order
to better market these Tango modems to prospective commercial customers. The
only differences are in GPIO and MCSI config:
* MCSI is enabled in the tangomdm build config.
* GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms
it can be used for anything. On Caramel boards this GPIO should be
configured as an output driving high.
* GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango
platforms it can be used for anything. On Caramel boards this GPIO should be
configured as an output, either high or low is OK.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sat, 04 Jan 2020 19:27:41 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/****************************************************************************** * Power Task (pwr) * Design and coding by Svend Kristian Lindholm, skl@ti.com * * PWR SW Modulation * * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $ * ******************************************************************************/ #ifndef __LCC_MODULATE_H__ #define __LCC_MODULATE_H__ #include "lcc/lcc.h" #include "lcc/lcc_cfg.h" // SW modulation using the following addresses #if (USE_PWL_AS_MODULATOR == 1) // D-Sample - no modulation - just envelope function to simulate GPIO 6 #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000) #define PWL_CTRL_REG (*(volatile unsigned char*) 0xFFFE8001) #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1) #endif /****************************************************************************** * Function prototypes ******************************************************************************/ void pwr_modulate_init(void); void pwr_modulate_on(void); void pwr_modulate_off(void); #endif