FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/pwr/pwr_analog_dev.h @ 632:d968a3216ba0

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
new tangomdm build target TCS211/Magnetite built for target leonardo runs just fine on the Tango-based Caramel board, but a more proper tangomdm build target is preferable in order to better market these Tango modems to prospective commercial customers. The only differences are in GPIO and MCSI config: * MCSI is enabled in the tangomdm build config. * GPIO 1 is loudspeaker amplifier control on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output driving high. * GPIO 2 needs to be configured as Calypso input on Leonardo, but on Tango platforms it can be used for anything. On Caramel boards this GPIO should be configured as an output, either high or low is OK.
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 04 Jan 2020 19:27:41 +0000
parents fb95e3f83dc5
children
line wrap: on
line source

/*******************************************************************************
 *
 * pwr_analog_dev.h
 *
 * Purpose: This file contains definitions that can be used by any SWE
 *          for power management services.
 *
 * Author    Candice Bazanegue (c-brille@ti.com)
 *
 * (C) Texas Instruments 2001
 *
 ******************************************************************************/

#ifndef __PWR_ANALOG_DEV_H__
#define __PWR_ANALOG_DEV_H__

#ifndef _WINDOWS
   #include "chipset.cfg"
#endif

/* Constants relative to the analog device */

#if (ANLG_FAM == 1) 

#define VOLTAGE_LOOP_OFFSET   400   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         240   /* (mV) spec */
#define DAC_VOLTAGE_STEP      1875  /* (uV) spec */
#define DAC_CURRENT_STEP      937   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#elif (ANLG_FAM == 2)

#define VOLTAGE_LOOP_OFFSET   200   /* (mV) measured */
#define MADC_OFFSET           160   /* (mV) measured */

#define DAC_THRESHOLD         0     /* (mV) spec */
#define DAC_VOLTAGE_STEP      1710  /* (uV) spec */
#define DAC_CURRENT_STEP      855   /* (uA) */
#define MADC_VOLTAGE_STEP     1710  /* (uV) spec */
#define MADC_CURRENT_STEP     855   /* (uA) spec */

#endif	// ANLG_FAM

#endif /* __PWR_ANALOG_DEV_H__ */